was cross threaded and didn't want to break it. All he done was put a glove on (made of Kevlar) and twisted it off easy. He didn't charge me and even gave me the new bulb for free. He reckons a rubber
...grip the bulb with a pair of grips with a cloth rond the bulb and try twisting it out that way. Don't worry if you break the bulb as all you have to do then is twist the remains of the bulb base out ...
Question about HBN 3550 Electric Single Oven
...twist and off it came. P.S. I'm a girl so I feel pretty good about that project Switch power off first, get a pair of pliers or grips and wrap a cloth round the jaws of same, then grip the bulb cover ...
...not come loose Hi.Try spraying WD40 around lens cover. Then place cloth around lens cover, and grip with a pair of grips, and twist anti-clockwise, it should come off. Please rate my solution.
...it is going to be one of two things. 1--the control knob is cracked or broken causing it to twist round without turning the control. 2--the spindle on the control is broken or loose inside
Question about ZBS963X Electric Single Oven
...which you then remove and replace. Grip whats left of it with a pair of taper nose pliers, and try twisting it that way. Or get a potatoe, and push it over the broken bulb, and try removing it that ...
...off. Any ideas. I have lost the manual Wriggle it from side to side and up and down while trying to twist it or the other trick to use is to grab it gently with a pair of grips with some kitchen roll ...
Question about ZBS963X Electric Single Oven
...power to the oven. Grip the glass light cover and turn anti-clockwise. I think the lamp then unscrews. Replace lamp, turn on power and check if lamp lights up, replace cover twist clockwise to
...grip and resorted to using two hands to exert as much force as I could manage, but it only moved a small amount. I think the movement was only the entire lamp housing moving in the oven wall, rather ...
Question about ZBS963X Electric Single Oven
...but instead of trying to grip the threaded part put the nose of the pliers in the centre of the broken buly and open the pliers out so that they jamb against the edges. Then just twist
Usually answered in minutes!
924 Questions
608 Questions
343 Questions
293 Questions
