Questions & Answers for: two way switch

Question about 12-Circuit Hard-Wired Transfer Switch

1 Answer

...hot (black) wires to the two brass terminals on the new switch. Gently push the new switch back into the box. Fasten the switch to the box with the two long screws at the top and bottom of the

Ad

Question about #GSW-SK Door Switch

1 Answer

...switch itself has only two wires, which I connected one to the other two whites, the other to the other two blacks. I connected the two ground wires to the back of the metal box with the screw ...

Ad

...two way switch,i am unable to switch the light off from the single switch.the single switch for the dining room does not operate at all.i,m pretty sure the wiring is wrong on the two way switch.if it ...

...two switch boxes 1-the neutral which does not connect to either switch, 2,3 the two travelers. Connect the two traveler wires to the two traveler terminals on the dimmer. The other terminal on the ...

...two old switches. I found that one switch had a black and white wire attached, as normal, while the other one and two black wires attached to from different runs and the two white wires from the two ...

Question about Lighted Switch

1 Answer

...two twin cables running to the switch mech. I'm not sure what you mean by two 14-2 wires. I am guessing you simply mean two twin cables. I'm guessing that the two twin cables have the same coloured ...

switch with two different lights, with two different feeds or, a single switch with two different lights, or something else?A stack swich can handle two different circuits with two different feeds, or

...switch with two switches on it, each switching on 1 set of lights. I have 2 brown wires, 3 blue wires, and a short length of free brown wire. L1, L2 and C on each of the gangs ! Husband undid light ...

Question about GSW-117 Toggle Switch

1 Answer

Switch has two screws. If one screw (or quick connect on back of switch) has 2 black wires and both these black wires leave the box without attaching to anything else, then remove one of the two wires

two switches. Don't describe the switch type just a switch location and how the wall light should behave when a switch changes. It's difficult to understand how you want a light to operate differently

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29492 Answers

Are you an Electrical Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...