...unbalanced, it may spin erratically or not at all. Open the lid after 2 minute gap and reposition the clothes. This automatically resets an off-balance shut-off switch. Close the lid and re-try. 2) ...
...Unbalanced load is sensed three times during a spin operation. to resolve the issue ----Open lid. Rebalance laundry load and close lid.· Check wiring harness · Check unbalance switch · Check circuit ...
Question about WM-2077C Front Load Washer
...during spin mode (b4 spin up happens) empty. wm3677hw LG WM3677HW ALLINONE. This happens even when run with NO LOAD!! Gets to spin, does back/forth balancing act for 7min before UE flashes. Hit ...
...Unbalanced load is sensed three times during a spin operation. Open lid. Rebalance laundry load and close lid. · Check wiring harness · Check unbalance switch · Check circuit board ...
...unbalanced condition, that is still continuing on to high-speed spin with no fault is occurring. sounds like damper rods are getting worn. they support bowl underneath.i think if u change them it ...
Question about WM-2277HW Front Load Washer
...Unbalanced load" is sensed three times during a spin operation, and to resolve the issue. 1. Open lid and Re balance laundry load and close lid. 2. Check wiring harness 3. Check unbalance switch 4. ...
Question about WM-2277HW Front Load Washer
...during the final spin. It does not reach the fast spin speeds, but shows the error after 5 minutes. hello ue is an unbalanced error one of the first things you can do according to lg is click this ...
...unbalanced for a few weeks(requiring us to open door, shift load &/or basket)-- mostly apparent when doing larger loads or bedding. However this morning, with a load of pants, it began making a ...
...Unbalanced Error) displays when you wash items that cause the machine to shake badly during the spin cycle, if possible wash and drain the items only, then open the door and stack the items evenly on ...
my LG WT1001CW wont balance Do you mean it shuts off during spin cycle? It is supposed to if the load is unbalanced. Try redistributing the load to see if that helps.
Usually answered in minutes!
1,845 Questions
401 Questions
404 Questions
243 Questions
245 Questions