Questions & Answers for: unstable washer drum

Question about Aquarius WMA52 Front Load Washer

1 Answer

...washer drum to give u sine noise if the drum unstable.and if you keep using the the machine,drum get demaged.mostly all front loading machines are like that.the test is,open back cover check if there ...

Ad

Question about ATF6000ES Front Load Washer

1 Answer

Drum Speed - Unstable The drum turns but will not reach high speed because it is banging around. Loud knocking. The spin bearing or basket drive may be worn. When these components are worn-they ...

Ad

Question about WM-2277HW Front Load Washer

1 Answer

...Washer started adding water and trying to balance itself. I could hear a faint "buzzing" and the motor did not seem to have enough power to rotate the drum. After unlocking door I opened and could ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

...unstable platform. So everytime the washer was out of balance, did it caused more damage to the washer? I have since thrown out the platform and the now worn out washer is pulled forward, away from ...

Question about WM-2277HW Front Load Washer

2 Answers

...drum won't rotate and I am getting a messasge " LE' on the display Code LE is a locked motor Error and it is caused by: • The connector (3-pin, male, white) in the MOTOR HARNESS is not connected to ...

Question about Aquarius WF000 Front Load Washer

1 Answer

...washer is making a very loud noice and i noticed slight smell of burning during cycle! The drum seems very unstable too! Could this be the drive belt? Is this fixable or am i looking at a new one? ...

Question about WSXH208A Front Load Washer

1 Answer

...unscrew and make the machine unstable yet again. Might take a little time but it is imperative, not only for good operation but it also saves damage to the drum supporting mechanism. Good luck! John ...

Question about W864 Front Load Washer

1 Answer

...unstable....What I mean is... if you put a blanket in it and the blanket is on one side of the drum, the computer decides that if the machine spins, the centre fugal force or whatever they call it, ...

Question about WTW6400SW Cabrio Washer

1 Answer

...HAVE A PROBLEM IN THE CONTROL BOARD, OR MORE LIKELY THE COUNTER WEIGHT OR BALANCE STABLELIZERS ARE BAD? THEY ARE WHAT BALANCES THE DRUM IN THE WASHER. AND CAN CAUSE AN UNSTABLE LOAD AND ERROR

...this makes the washer unstable and vibrate. also but more pressure on the springs that keep the drum up, they are easy to change, access to the springs is at the top the sockers are at the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...