Questions & Answers for: vac

Question about Vacuums

2 Answers

how to connect the vacuum system in the swwiming pool http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=564116 Generic problem for all Vacuums How to connect the vacuum Posted by herpor on ...

Ad

Question about Shop Vac Vacuums

2 Answers

I have a Shop Vac (Wet/Dry) Model 5275 (120V 60Hz 6.4A), Peak HP of 2.75 While vacuuming the Shop Vac fell over, stopped working, and would not come back on again. Tried plugging into another outlet, ...

Ad

Question about 584-06-00 Canister Wet/Dry Vacuum

1 Answer

How do I change my Shop Vac QPV 10.5 from a wet to I don't have an owner's manual. How do I change my Shop Vac QPV 10.5 from a wet to a dry vac? you need to go get some bags and srew on the nozel and ...

...when u turn on panel switch and the light wont turn in checked all fuses seem ok Starting with the vac reservoir behind the battery box, working towards the IWEs, check for cracks in the vac lines ...

...to be working If the test still holds true with the wheels on the ground, I would say it is the vacuum disconnect motor or the vac lines to it. This is on the front axle ( item #10 in the picture ...

can't get heater to work. no air from vent, seems to be vac prob can't get heater to work. no air from vent, blue vac line was broken ,when I fixed it, it still no air then I switched vac line that ...

Question about 13,000 Watt / 13,000 Watt Home Standby Generator

1 Answer

Generac 12 kW runs fine but puts out 240 vac and when load is applied switches to 330 vac... When stepped down to 120 vac starts out at 120 vac and then when applied to inverter (for charging) goes to

Question about 13,000 Watt / 13,000 Watt Home Standby Generator

1 Answer

pool vac keeps getting stuck in a corner and wont move the rest of the day Pool vacs sometimes do that. I changed my pump to the next bigger pump because once you hook that vac to it, it reduces the ...

Question about 13,000 Watt / 13,000 Watt Home Standby Generator

1 Answer

Why does the ball inside my shop vac stay stuck if you are using vac to suck water the ball is a safety device. you must shut vac down and wait you should hear ball drop, if the vac is not in upright ...

I have a shop vac 3331.5 I'm looking for a replacement hose for any idea where to get one that's sure to fit? 2 1/4 inch opening. Orange Body says "Shop Vac portable Blower Wet Dry Vac" label says ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...