Questions & Answers for: vaccum leaks

Ad

...the cannisters as well as changed the gas cap. Any ideas regarding cause? Thanks, Monty You have a vaccum leak somewhere, try the map sensor vaccum or the EGR Control valve ...

Ad

Question about 1998 Elantra

1 Answer

...vaccum line connected, you don't want any leaks there. Those are the easy fix suggestions for a vaccum leak. If you can't find it there, look for other vaccum operated items that are model specific. ...

Ad

Question about 2001 Grand Am SE

1 Answer

...is the one that has me confused) Vacuum leak at engine (How do I find it?) You can generally find a vaccum leak by pressure testing the system. Most auto parts stores sell a vaccum tester relatively ...

...locking module has a leak that is as well connected with air bag system.I suggest take it to mechanic and check for leaks on vaccum system.If vaccum lines are not leaking, could be vaccum

Question about 2000 S-10

1 Answer

when I change my defrost switch air to floor heat air, it stays at defrost air. check for a vaccum leak under the hood.check for vaccum at your vaccum tank.a vaccum leak will cause it not to change ...

Question about 2000 S-10

1 Answer

... it doesn't do it all the time but has been doing it often lately Sounds like either you have a vaccum leak or the idle air control valve is acting a fool. I'd start by looking for a vaccum ...

Question about 2000 S-10

1 Answer

P0106 _ 2000 mazda protege lx 1.6 Manifold Absolute Pressure/Baro Sensor Range Out of Limits. You have a bad MAP sensor or a vaccume leak going to the sensor. If you can't find a valid leak to the

Question about 2001 Durango

1 Answer

how to find a vaccume leak have a vaccume leak, ran low on gas today and it started shaking really bad, it drivable but barely take a  propane torch and turn it on slightly,run it over the ...

vaccum leak/torque converter engine code i have a vaccum leak but my engine light code says a torque converter problem? i have not fixed vaccum leak yet. does anyone think it could hopefully just be ...

Question about 2006 Ram 1500

1 Answer

won't go in 4x4 4x4 will not shift go into gear so what could the problem be Vaccume leak going to the 4x4 actuator. Replace the vaccume line or look for vaccume leaks.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...