Question about Dei Valet 561r Remote Start/Keyless Entry
valet remote start i need to know how to replace a battery in a valet remote start i own a 2005 ford explorer sporttrac have to do it within 2 mins....use a knife and split the case open the rest will
Question about Car APS57A Remote Start and Keyless Entry System with Trunk Releas
...i find it? Its a Audiovox Persuit series PRO-OE4bs41 after market remote the valet is a little toggle switch used to disarm the system should be mounted somwhere on your dash if it was done ...
Question about 5900 SST 2-Way Security System / Remote Start System with Responder S
...release valet switch one time, then press and hold valet switch while pressing lock button on remote.You should hear a confirmation chirp from the alarm. Release both buttons.Turn off ignition.
Question about Dei Valet 561r Remote Start/Keyless Entry
valet 561r remote on my Honda van for several years. Worked flawlessly. Recently, it began working intermittantly. Did not work for several days. Then worked for about a week. Then nothing. The remote
Question about 791XV The 791XV is a 2-way Security and Remote Start system. Th
...valet switch, press lock button on remote. The alarm should chirp to confirm entry into the programming mode (when you press and hold the valet button) and when you press the lock button. Turn ...
Question about Dei Valet 561r Remote Start/Keyless Entry
...Valet remote car starter and the car keeps starting on it's on without us using the remote. Does it only do it in one location, or wherever you are? If it's one location, it's likely one ...
remote. Press and release the valet one time, you will hear two chirps from the alarm, press the unlock button on the remote. Repeat as necessary. Turn igniton off to exit programming. Test remote for
Question about 5900 SST 2-Way Security System / Remote Start System with Responder S
...remote system if possible The car's computer wont let it start?Well, if you changed the battery and the viper alarm is the issue; locate the push button valet/programming switch. Turn the ...
Question about Directed Electronics 479V Remote Gen 2 Responder
...valet button once then, press and hold the valet button. press the lock button on the remote. Vehicle should respond with a chirp from the siren. Release valet button, turn off ignition, test
Question about Prestige Remote Start
remote would not start the car and the batter is brand new from the night before. Could the FOB be stuck in valet if thats possible? or what does the led being on constantly mean? yes i think it might
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions