Questions & Answers for: Chevrolet TrailBlazer valve actuator

Question about 2006 Trailblazer

1 Answer

Actuator Solenoid Valve is probably restricted with carbon deposits. This is usually caused from going too long between oil changes, or using substandard oil and filters. Replace the Camshaft Position

Ad

Question about 2006 Trailblazer

1 Answer

...actuator valve located on the 2006 chevy trailblazer THE CAM SHAFT ACTUATOR IS LOCATED IN THE CYLINDER HEAD ON THE FRONT RIGHT HAND SIDE JUST ABOVE THE POWER STEERING PUMP. AFTER YOU REMOVE THE ...

Ad

...get the part 89018675 from cheaper? it is a mode valve actuator for a 04 buick rainier The only place we've found them are at the dealer.Might try O'riely's they are supposed to start carrying

Question about 2002 TrailBlazer

2 Answers

...valve actuator connector. HVAC control module - left side Detach the defrost valve actuator from the HVAC module. To Install: Attach the defrost valve actuator to the HVAC module. Torque the screw to ...

Question about 2002 TrailBlazer

2 Answers

valve and not a solenoid as a solenoid or actuator would give you a one time click or knock as its moving from one position to another not continuous. I would have it checked by a mechanic as you prob

Question about 2004 TrailBlazer

1 Answer

...valve timing. this can can be caused by a bad gear actuator or a bad solenoid. there is a sol mounted on the right front corner of cylinder head. you can start by replacing this part and see what ...

...Valve Actuator Assembly Using Special Tool GE-47676) - SUPERSEDED BY BULLETIN 05-01-38-001A - (Oct 21, 2005) Mode Valve Actuator Replacement Tools Required GE-47676 Mode Actuator Removal Tool Removal ...

...Actuator Solenoid Valve...See picture of missing screen; Where the "X" is...It's easy to check before you buy another...The camshaft actuator solenoid valve is located on the right side of ...

Question about 2004 TrailBlazer

1 Answer

...not changing If what you mean is that the air comes out the defrost rather than the vents, this may be a vacuum leak, bad vacuum check valve, or bad blend door actuator. ...

...Valve Actuator Replacement - Left Side Removal Procedure Remove the I/P carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console. Removal Procedure Remove the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...