...carb; fit that freed end to a suitable container; depending on the version, PRI setting of the fuel valve/control would make the fuel in the tank to flow; if PRI is not available, the smaller hose ...
Question about 2004 GZ 250 Marauder
...valve clearence but dosent tell you how. side note: is there anything (like any settings) to boost the proformance of this bike?? you use a set of feeler guages to measure the gap between the valve ...
...spark plug and set the gap to the specs of your bike's engine and check and adjust accordingly the valve clearance. Hope this
...engine, move it around and u can pinpoint the area it is coming from better. I would say that your valves are probably making the ticking noise and need to be adjusted. Either that or an exhaust
Question about 2003 GZ 250 Marauder
Using a feeler gauge what would you set your exhaust valves to on a 2003 Suzuki gz 250 Hi, Wayne valve clearance (when cold): IN. : 0.03-0.08 mm (0.001-0.003 in) EX.: 0.08-0.13 mm (0.003-0.005 in) For
Usually answered in minutes!
33 Questions
15 Questions
13 Questions
10 Questions
9 Questions