Questions & Answers for: LG vent blockage

sure it has a clear clean vent.no kinks in vent hose.if yours vents thru roof then you may want a chimney sweep to come and sweep your vent out.if it goes thru a wall check and make sure know blockage

...on. Start button seems to not be working If the filter is clean, a blockage or lint buildup in the vent line could cause this problem. Make sure the vent line is clear all the way to the

dlg5988w gas dryer flashes EE1 and won't heat but it will spin dry w/out heat. There are no vent blockages. you may need to change the coil valve on the gas burner

...lint trap pull the dryer out and pull the dryer vent off and dry a load with it off and away from the wall if it works the u have a kinked hose or a lint blockage in the hose good luck hope this ...

vent blockage. I checked out side vent, pulled dryer out and cleaned the back end. Also took apart filter holder. I did find a dryer sheet below filter chamber. The word blockage is still showing? Any

...on air flow and need to fix immediatey disconnect vent tube and run dryer, if it still says blockage then you will need to disassemble dryer and clean from the lint trap to the vent, Good Luck ...

...vent behind the dryer to make sure it's not kinked. Take off the dryer vent and run the unit to see if it will dry normally. If it does, you still have a blockage in your exhaust vent in the

...cleaned. SERVICE MANUALNOTE:I have several manuals on hand and they all read the sameThat could be the lint has a partial blockage in the outside vent and the vent thermal limit is tripped.DRYER ...

...Next turn on the dryer and go outside to the dryer vent and make sure you have good airflow coming out.  If you don't have good airflow then there is a blockage in the vent system

...vent - no blockage. performed test with duct disconnected- 4 bars complete blockage I would check inside and see the blower itself it may have lint or debris obstructing it, see if u can turn it by ...