Questions & Answers for: Mastercool vent blockage

Water distributor is not distributing water evenly. Only coming out of two outlets. Please help Hi, they tend to get plugged up at the center piece where they plug in. Pull out each wand and clear it.

Should I vent my house when running my Mastercool? yes. keep at least 1.5m2 of open window or door open

...MasterCool Evaporative Cooler, ASA71 So when I cut open the side of my house I have a way to vent it thur the wall. Is there a kit you can buy? Best way is to get a sheetmetal shop inyour area ...

I have an updraft evaporative cooler. I get a lot of white flakes coming through my vents. Looks like hard water calcium flakes. How do I resolve this issue? clean and service the cooler. remove the ...

motor is running slow and both upper control box and motor case are fairly hot strong electric smell from vents dont know what unit 5 outlets total evap box size 1.2x1,2 mt square about 8yo had this ...

I have a Bonaire (Cold Front) which is vented. My friend gave me the unit so I don't know a lot about it. Does it have a filter that I need to change or clean? Thanks, John ...

...and again it still only hums when starting it (no turning movement). I tried hi and low speeds, vent and cool, same results. You need to replace the fan motor and

My mastercool 5500 swamp cooler has water pouring inside the house and dripping down the front vent. Lots of water not just a little moisture. It appears to be shooting straight inside from the top ...

...blockage, EVAP valve/canister, EVAP vent valve, BARO sensor, MAP/BARO switching valve, ECM P1448 - NissanTypePowertrain - Manufacturer Controlled DTC - Manufacturer ControlledDescriptionEvaporative ...

can i reduce the duct vent size can i reduce a 12 inch supply to a 10 inch yes of course you can but if its because your getting to much air you can reduce the fan speed by just replacing the pulley ...