Questions & Answers for: Onkyo s video input

Question about HT-S907 System

1 Answer

Sound from Video input All other sources (DVD, Radio, Zone 2) work just not the video (TV) input the video input is usually an in and an out side-by-side. make sure you are in the IN.

Ad

...video input that you are trying to configure (i.e. video 1-4). Press the menu button on the receiver or the remote and cycle to video settings. There should be a setting that says "video output" or ...

Ad

Question about TX-SR605 Receiver

1 Answer

...video input on the Onkyo. This may sound a little confusing, but remember that the hdmi has the audio and video in one cable, the other video options do not, so you must run additional cables for the ...

Question about TX-SR605 Receiver

1 Answer

...coaxial, RCA, you note and put tv input setting on the device that you are going to use. If you have the audio working on each device, check the video input for each device. Make sure they

...should solve your problem. Good Luck! try checking the input assignment section and go to Component Video Input. Make sure DVD and CBL/SAT has" -----" on them to prevent conflict. Hope this helps.

Question about TX-NR905 Receiver

1 Answer

... it only shows an analog input not digital 5.1. Have you selected the digital input through the audio setup? You can assign different digital inputs to various video inputs and this may solve the ...

...VIDEO INPUT jacks. With the initial settings of the TX-DS898, the VIDEO 3 and VIDEO 4 input sources are set for the COMPONENT VIDEO INPUT 2 jack. If the video connection is made at COMPONENT VIDEO ...

input selected, I only get video not audio. If I select cd input it operates normally. It was working ok. Any ideas? Make sure your DVD setting is looking at the right audio inputs. Usually there is a

Question about Tx-sr507 A/V Receiver

1 Answer

...video INPUT on the back or side INPUTS of your TV. Then when you want to play the Wii, set the input mode on the Onkyo to the inputs that you connected the red and white plugs into, then change the ...

...input no sound but Sound in all the Video inputs but no picture. I never tried the video inputs before and the Cords are all fine. What gives?? Hello You just need to perform correct connections to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Onkyo Audio Player and Recorder Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

John
John

Level 2 Expert

510 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...