...input video. Also there is either a switch on the back of your tv or in your menu where you have to choose "component video". Or it might be labled Video 1, Video 2, Video 3, etc. You might have both ...
video 2, input 1, input 2 etc. but i cant get the remote to do that please help me. another example is: simply having to change the input/video mode to get a dvd player to play. help me. go screw your
...video input and the two white cables in to the audio inputs. this is the correct way to connnect the dvd to the television.You can get technical support from Zenith at this telephone number. ...
Question about C27A24T 27" TV
video input jack (yellow) in addition to the s-video input. Use that input instead of the s-video. The video won't be quite as clear as with s-video, but you have to work with what the combo gives you
Question about E44W46LCD 44" Rear Projection HDTV-Ready Television
...video input rather than the tuner? The menus are generated internally and enter the video stream later on in the processing than either the tuner or video input. Please try one or more of the video ...
Video input which I would recommend using instead of the RCA Video in. You'll still need to use the RCA inputs, but the S-Video will give you the best video connection into this monitor. If you have a
...I can not get to channel 00! HELP PLEASE! I could not find a manual, but try this: connect live audio and video signals to input and surf down channels past ch. 2 to see if it goes to the video
...output of the DVD player to the AV/Input/video input/audio input of the TV. Now use your remote to select the AV channel and your video and sound will come. Do this carefully . Hope you try. Good ...
...Video input 2 with the same make up. You can hook up a VCR or DVD to either and switch from one to the other. You have the cable/antenna hook up F connector all the way to the right. you can read ...
Question about R56W36 56" Rear Projection Television
...or a sync problem----using the video inputs bypasses the tuner and front end of the set's signal circuits---consider using a box with audio and video outs to a rear input and bypass the
Usually answered in minutes!
269 Questions
273 Questions
232 Questions
195 Questions
159 Questions