Questions & Answers for: Sharp LC s video input

input ports and equipment used on those ports. This happens often. If all else fails I would get a schematic and start looking at the RF, HDMI, Composite Video, S Video, and component video inputs and

dvd to tv transion I have a lc46sb54u sharp flat screen tv. I have my DVD player hooked up to it. the only way I can get it to play is to go to input and select it. is there a setting I can put it at ...

...input" or "video source" button by mistake on the remote or TV? That would change the input from the one the cable/video source uses. You're getting sound, so it's working......sounds as if the input ...

input that works is the tuner, all other inputs aren't letting video through. I gotta scope it but need to know what to scope, NEED THE MANUAL First go into service and perform a factory init. if that

...input. You need to supply the Video and Audio signal from the DVD to the TV via cables. below is a link for your manual it's all explained in there. ...

My tv will not retain the input 4 setting to receive the signal from my cable box. When you turn the TV on it would say please wait and then the Input 4 box would appear ont he screen and then the ...

...Picture is fine but it won't load a video jack from a Wii or an HDMI for apple tv. I've tried all the slots and nothing. Any ideas? Theliquorguy, Do you change the input

...video but the audio was fine. Thus, check your cables and make sure that they are all connected to the matching input and output. You may want to try a different cable, in case one of the wires is ...

...video input is selected on monitor, see monitor manual on how to select different inputs. 2. If correct input is selected, ensure connector pins in cables are not bent. 3. If output is from a laptop, ...

a properly chosen channel then something is wrong with the RF or IF section inside the TV. If you can connect an external video source to the TV see if that works while selecting the proper input mode