Questions & Answers for: Suzuki EC450 FSR vin number motorcycle suzuki

Question about 2009 RMZ450

0 Answer

Hello . 2009 rmz 450 no fire. Was on 4th race of the day when loss power engine poped, spit and died. will not start. No spark complete rebuild of engine 2 weeks prior.Crank,piston,cylinder, Bike was ...

Ad

Question about 2008 RMZ450

1 Answer

my 2008 rmz 450 kick starts no problem then about 5 seconds later it immediately dies, like you hit the kill switch...just started this yesterday any help will be greatly appreciated try simple option

Ad

Question about 2008 RMZ450

1 Answer

how do I change the engine sprocket shaft seal Hi, if you have the new seal, and the outer radius of the seal is plain, with no locators then you can simply remove the seal by hooking it out of the ...

Question about 2011 RMZ450

2 Answers

vin number check on rmz 450 vin number check on a rmz 450 It should be engraved on the frame near the front forks. Where do I fined my vin number on my 07 rmz450

Question about 2011 RMZ450

1 Answer

front forks oil refill front forks are way too stiff Check air pressure under the caps (on top of the shocks). Should only have up to 10 psi in them.

Question about 2008 RMZ450

1 Answer

suzuki problems gas in my oil Leaky carb. Check the float

Question about 2009 RMZ450

1 Answer

motorcycle idle I have a 2009 RMZ 450, went for a run the other day, just trail riding, not fast or slow but fast enough it didn't overheat, but when I got back, pull ed the clutch in to stop and ...

i need valve clearance to suzuki 2011 rmz450 on most engines .06 intake, .08 exhaust

Question about 2008 RMZ450

1 Answer

Valve clearance for 2008 Rmz 450? The valve clearance when cold is intake 0.009 - 0.016 mm (0.004-0.0006) inch exhaust 0.17- 0.24 mm (0.007-0.009) inch This is for a 2009 model don't know if engines ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...