Questions & Answers for: vision fitness treadmill t9450

...vision fitness T9450 treadmill. My wife was using it and it slowed to 2mph. That is all the faster it goes now. Elevation controls work fine and everything else functions. first thing to do is to ...

my vision fitness t9450 has dashes on the display & will not do anything. Any recommendations safety switch could be defective

...Vision Fitness treadmilll #T9450. When I have the Vision Fitness treadmilll #T9450. When turned on the screen will light up and beep, but the belt won't move. It hasn't been used very much, but I've ...

Vision Fitness T9450 The buttons on the touch pad stick etc. This is probably a common problem as all the electronics I have ever dealt with that had membrane keypads always wore out after a period of

I have the t9450 and turned it on went for about a minute then stopped suddently and read out e6. Please help thanx Replace belt, flip the deck and lubricate!!!!!! If not your gonna burn it up.

...Vision Fitness t9450 treadmill incline and speed quick keys stopped working along with the manual speed and incline buttons We just moved our treadmill into the house today and I had been running for ...

...Vision Fitness T9450 treadmiill The primary cause of E5 is the elevation system malfunction - Elevation error (signal lost) First check all wires from the elevation motor to the lower motor control ...

...vision Fitness T9450 treadmill, and recently the running speed has changed on it. When setting the speed at let's say 5.5 mph, the belt runs faster now than it used to. What could cause this? This ...

...VISION FITNESS TREADMILL THAT WHILE WALKING ON IT, IT SHUTOFF ABRUPTLY,EVERYTHING LIGHTS UP BUT BELT WON'T MOVE. First thing to do with these folding vision fitness treadmills is REPLACE THE MAINS ...

...vision+fitness+T9450+no+speed+control .. If your Vision T9450 HRT treadmill comes on at full speed when the unit is powered, and you have checked the speed sensor, there could be a problem with the ...