need an a.w. sperry dsa-7610a manual It only came with a sheet of paper, operating instructions on each side. I can scan and email you a copy - if you want one, please email your address to ofgdad at ...
...to draw the current, and large enough not to overheat or burn, connect it and measure the loaded voltage drop, compare the voltage and current of the loaded battery, and compare it to that of a
Question about HST401 Voltage Continuity Tester
My digisnap DSA-500 has test leads for testing voltage but no way My digisnap has test leads. There are sharp points on one end and the other has plastic blunt ends. Neither end can be plugged into ...
Question about HST401 Voltage Continuity Tester
Don't know how to use my Sperry outlet tester I have this Spreey outlet tester. One red prob and one black prob and I've never used one before and don't have a manual. I can't download the manual from
Question about HST401 Voltage Continuity Tester
just tested gfci receptacle with sperry gfci outlet tester and got all three (red,yellow,yellow) lights. What does this mean?? Your tester is defective then. All 3 lights should not light up. The ...
Question about HST401 Voltage Continuity Tester
My Sperry DSA-400 Digisnap VOM sometimes reads double what the voltage is by another meter. DC voltage is particularily off regularily but sometimes the AC voltage is too. New battery hasn't helped ...
Question about HET202 2 Range Voltage Tester
how do you check circuits using this model tester? This is a Voltage tester, not a circuit tester
what a 2-range voltage tester used for This simple, inexpensive tester is described by the manufacturer as a 2 range voltage tester. It appears to have two ranges of voltage that it can test for the ...
i lost the instructions to my voltage tester. Does the red probe goes on the ground and the black on the black wire to test for voltage? If you are testing A.C. volts in most cases polararity really ...
Question about HST401 Voltage Continuity Tester
How do I check 8 volt golf cart batteries with an Argus AA500P Battery Analyzer? Use the voltmeter and connect the test probe (red) to positive side of the battery..the other side on negative
Usually answered in minutes!
16 Questions
7 Questions