Fuser error 50.2 HP4345 Can you please tell me how to correct this Fuser error 50.2 HP4345? You will have to replace the fuser assembly (the error refer to the fuser warm up temperature)
...warm restart, hold down the 3 button till u get the trouble reset screen, perform T reset if the machine goes to ready clean up the thermistor. The code c0500 means that is "fuser warm-up
Fuser 50.1 error on HP 3500 printer 50.1 fuser error message showing on HP 3500 laser printer. Fuser is not hot. Took fuser out, returned it and made sure it was seated. Changed power cord. ...
Question about IntelliFax-2820 Laser Fax
...warm up" error found that fuser was melted to the sleeve. installed new fuser and got a "fail to warm up" error. looked at fuser and the brand new one is melted to the sleeve agian. looked at all the ...
...Error appears when the fuser does not warm to the required temperature to operate properly. For this error on this Lexmark model ... You have to replace your fuser assembly. (Assembly 115V fuser) ...
...ERROR MESSAGE C6000 Fuser heater break Fuser thermistor 1 detected less than 70°C/158°F for 10 s during warm-up and ready in. During warm-up, the temperature at the fuser unit thermistor 1 does not ...
Question about KM-1815 All-In-One Laser Printer
...warm after fuser error is solved and the power is turned OFF/ON. 6 A low temperature of 10°C is detected in 10 seconds after printing started. 7 A temperature of 190°C is detected in ready mode after ...
Question about KM-1815 All-In-One Laser Printer
...warm after fuser error is solved and the power is turned OFF/ON. 6 A low temperature of 10°C is detected in 10 seconds after printing started. 7 A temperature of 190°C is detected in ready mode after ...
...error c6000 of km 2035 machine Fuser heater break Fuser thermistor 1 detected less than 70°C/158°F for 10 s during warm-up and ready in. During warm-up, the temperature at the fuser unit thermistor 1 ...
fuser error. HP 50.3 fuser error The 50.3 or 50.2 fuser error on HP printer models reflects a time-out problem. The presence of this error usually indicates that your device is warming up very slowly.
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions