Questions & Answers for: washing machine impeller loose

...to drain pump.. pull pump out ckd the impeller on motor pump shaft there should be a slight resistance when the impeller is turned by hand ..have seen impeller come loose of motor shaft and free ...

...impeller on pump shaft come loose and freewheel..remove pump completely 3-4 screws hold pump motor to housing remove them try turning impeller if impeller spins free replace pump ..impeller will ...

...washing machine My drain pump has a loose impeller which wont stay on for long when i re-attach it and test the machine . Any suggestions on how i can get it to stay on?? You could try an epoxy glue, ...

...Impeller loose. I have a Bosch classixx 1000. The machine will not empty, when I open the drainage port the impeller is loose and falls out. How can this be fixed? You are best fitting a new pump asa ...

machine . cleaned out pump but still not working. Believing the pump to be operational, there is a possibility that the impeller within the pumb is broken or loose on the shaft. Eventho the pump motor

...washing but the noise is extremely loud. We cannot find anything loose in the machine. Thant is usually a damaged pump impeller making the high pitch noise, you can order a impeller repair kit and ...

...machine. Could the impeller to drain the machine be blocked? How do you get to it to check? Could it be some other issue? Thanks in advance! The pump uses an impeller to move the water into the drain ...

washing machine will not drain washer fills and agitates but will not drain. checked lid switch and has continuity as required. removed pump and checked for clogging in pump, hoses and tub oulet- no ...

washing machine constantly comes loose and floats to the top of the washing. In all other respects the machine apparently works fine with no undue noises except when impeller loosens. Suprisingly good

...ruin the impeller by reducing its size and things go south fromt here , washing machine pumps are not that hard to change, if your physicaly able to turn machine on its side , if not yes its a ...