Questions & Answers for: water cycle works

...cycle it starts working again. This is on all cycles, and the cold water doesnt work at all either. the humming noise is probably the cold valve operating but no water. check tap not turned off. ...

...cycle doesn't advance, it's probably the timer or a cold-water supply problem: * It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the ...

...cycle. I know the water is working fine because it works fine on the rinse cycle. The warm wash cycle only comes out with hot water. It was working just fine yesterday. post model number in problem ...

...entering during the warm cycle. The hot water cycle works, the cold cycle works. But for some reason the hot water does not enter on the warm cycle? What is wrong? sounds like faulty solonoid

...cycle with hot water off and cold water on no water fills but the cycle runs - if I try to run cold cycle with hot water on and cold water on it runs with hot water. Most likely the cold water valve. ...

...i suspect the problem being is that it's not filling with cold water on the rinse cycle because of a bad water inlet valve. GENE my belt was left in my trousers and is stuck around the ...

water on the Normal cycle. The Normal cycle doesn't pump water into the washer. It will run the whole cycle, spin the clothes, dispense detergent - but at the end of the cycle, the clothes are

cycle, but there is no water in the dishwasher. After a few minutes, the cycle stops, and the washer claims the dishes are 'clean'. When I try starting a new cycle over and over again,

...cycle no water comes in. At that point, the machine keeps spinning as if water is coming in but none comes in. The countdown clock stops and doesn't change. After a while, the IE code comes on. Water ...

...water cycle does not work Cold water cycle does not work. Can get only hot water when cold water cycle is run Swap the hoses around on the Hot & Cold water Taps to prove that the Cold water ...