water function just at the rinse cycle Appreciate any suggestions, Robert The cold water solenoid valve seems to have failed on you. They're easy to replace and can be purchased at any appliance parts
Question about Novotronic W1918A Front Load Washer
...rinse, the water trickles slowly through about half the holes that drain into the tray that holds the detergent for a regular wash. I have also checked and there is no water being supplied from the ...
rinse cycle switch 1 click. (the rinse cycle switch is the one that does not have the knob on it. Unplug the machine before this is done. You will now have a full tub of water for the rinse cycle
...to selected water level agitates wash cycle drains wash water spins wash cycle fills to selected water level on rinse cycle agitates on rinse cycle drains rinse water spins final time end of ...
...i suspect the problem being is that it's not filling with cold water on the rinse cycle because of a bad water inlet valve. GENE my belt was left in my trousers and is stuck around the ...
...water during rinse cycle Washing machine beeps only during the rinse cycle to say "Help, I am not getting enough water." No problem with water during the fill or spin cycles, only during ...
...rinse cycle water it is very slow and cold. I have started to wait for the rinse cycle and then turn the dial back to fill until it fills up and then I turn it to the rinse cycle to finish. All the ...
rinse, the cold water the cold water won't come in. Therefore, the washer does nothing. To check the water valve, first cut the water off and remove the hoses off the back of the washer. Then one at a
Question about IWL12 Top Load Washer
...won't pump out the rinse water but begins the spin cycle with rinse water in it. What is the problem? The pump works and pumps after the wash cycle. the pump could be blocked............easy fix ...
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions