...Frigidaire front loader washer model LTF2140E doesnt want to drain the water when set to wash (heavy-normal-quick selectors). It washes put thats it. I have to switch the selector to drain/spin then ...
Question about GLTF2940ES Front Load Washer
...Frigidaire washer model GLTR1670AS1 I've tried all the cycles. Lights go through the cycles but the washer will not drain or spin. It agitates but that's about all. This often is a drain hose that is ...
Question about ATF6000ES Front Load Washer
...Standing at the front of the washer, push top panel towards rear, then lift up and remove. Notice the water inlet valves on the rear left while facing the washer front. Unplug washer, then remove the ...
Question about GLTF1670A Front Load Washer
What size drain stand pipe should be used? Water is backing up from the drain. Machine is working great but water over flowing at the stand pipe The problem is being caused because there is a blockage
Frigidaire washer will not drain. It work fine for my first three loads this morning and now it only fills with water and stops. check all the drain hoses for something caught in the line to the drain
Question about 24 in. FDB1050RE Built-in Dishwasher
standing water. Any ideas???? Most dish washers have standing water. It should just be a little, say depth of your fingernail. The amount of water depends on the height of the drain hose mounted under
Frigidaire front loading washer. E10 error code is an indication of a slow fill, took to long to fill, no fill or the fill water could be siphoning out the drain hose as it's filling with water. Check
Question about ATF6000ES Front Load Washer
...water in the drawer. My Frigidaire affinity washer leaks water into the washer stand. Whenever I open the drawer after washing a couple of loads there's water in the drawer. That's what I ...
Question about ATF6000ES Front Load Washer
Frigidaire washer, ATF6000ES, and your washer is receiving an error code of "E20". "E20" stands for the water is not pumping out fast enough which means it could be an issue with your control panel or
Question about ATF6000ES Front Load Washer
...Frigidaire washer. This could be an issue with the water pressure coming into your washer the psi must be above 30 psi. If it is not you may need to correct the pressure issue. If it is check to ...
Usually answered in minutes!
915 Questions
809 Questions
800 Questions
690 Questions
469 Questions