...to remove the red light. Many Thanks Hold down the "ice type" and "child lock" buttons (bottom button on the left and the right) together for about three seconds. The light will change back to
Question about GE SmartWater Household Water Filtration System - GNWH38F
red button. Then it says to unscrew the filter take the old one out and clean the filtrstion system then put the new filter in and put the filter system back together then turn the water back on. When
Question about ARSE66MB Side by Side Refrigerator
red lite is still on after replacing flter in amana side beside.what button to push toturn it green? Press and hold the lock and water buttons at the same time for 5 seconds the green light will flash
...red light stayed on you will wither have to push the light switch button 5 times or push and hold reset button or 2 at a time. Look at the display carefully it usually will tell you what you need to ...
...button, I just watch red led blink one time and it does not work at all. I do not know what is the correct led display way? I guess when you push the test button, the led will be on until you release ...
...red to green. I don't have a 'RESET FILTER' button. I'm seeing suggestions to hit the refrigerator light button 5 times in 10 seconds. That didn't do it. I tried 10 times as Whirpool suggested, still ...
Question about S20DRSS33 Side by Side Refrigerator
red light go off? Hold the lock and the light button in at the same time for about 20 seconds . Close water valve,bleed water out of line into a cup untill none comes out.Remove filter,unplug frig for
Question about GE SmartWater Household Water Filtration System - GNWH38F
...red button several times until it looked like it seated well. Keep as much water in the cannister(sump) as you can and still have the filter seated properly. Screw it back on, and open the water ...
Question about GE SmartWater Household Water Filtration System - GNWH38F
...Button; Stays Red after changing filter on Frigidaire Refrigerator/SideBySide LGUS2642L The Reset button stays on RED even after we have replaced a water filter; It will not respond to our pushing in ...
Question about GE SmartWater Household Water Filtration System - GNWH38F
...the Reset button firmly for 5 seconds. If needed, use a capped ballpoint pen. The green, yellow and red lights will simultaneously blink. Release the RESET button when only the green light
Usually answered in minutes!
256 Questions
322 Questions
159 Questions
188 Questions
143 Questions