Questions & Answers for: Craftsman wheel

Question about 16" High Garden Tractor Snow and Dozer Blade

Screws on my Sears track drive snowblower unthread themselves.

...Sears track drive snowblower unthread themselves. Basically the threads that hold the track drive wheels on, unthread themselves when the snowblower is in motion. My question is this: Should the ...

Question about 16" High Garden Tractor Snow and Dozer Blade

1 Answer

Left wheel does not turn, axle turns but wheel does not turn.

Left wheel does not turn, axle turns but wheel does not turn. I have a Craftsman 5.0HP rear tine tiller and the left tire/wheel does not turn. I see axle turning, but tire/wheel does not turn. The ...

Question about 16" High Garden Tractor Snow and Dozer Blade

1 Answer

Bandsaw blade keeps coming off the wheels. What

bandsaw blade keeps coming off the wheels. What bandsaw blade keeps coming off the wheels. What can I do? ALL BAND SAWS HAVE AN ADJUSTMENT FOR THE BLADE TRAVEL WHEN I WOULD REPLACE MINE I WOULD ROTATE

Question about 16" High Garden Tractor Snow and Dozer Blade

2 Answers

Craftsman model 917377411 front propelled drive not engaging

...and handle lever is operating plastic linkage on transm. what is most likely problem keeping front wheels from engaging. On your model I beleive these wheels are driven with small gears inside the ...

Question about 42 in. Deck 19.5hp Lawn Tractor

1 Answer

How do you fix the front wheel alignment on a 48

How do you fix the front wheel alignment on a 48 inch lawn tractor by Craftman. The wheels are turned to the outside. Theres no bent rods or anything. Whenthe wheels go one way in the frony. you mow ...

Question about 42 in. Deck 19.5hp Lawn Tractor

1 Answer

HOw do I change grinding

HOw do I change grinding wheels on a 6 inch Craftsman bench grinder? Thanks. There should be a guard over the wheel, held by several screws. Remove this. The nut holding the wheels loosen in the same ...

Question about Push Rear Bag Lawn Mower w High Wheel (CA)

1 Answer

I want to take the front axle off my self propelled craftsman mower and replace it with jus a straight push wheel

...take the front axle off my self propelled craftsman mower and replace it with jus a straight push wheel my front wheels kept stipping so i had someone fix it to be non self propelled but all they ...

Question about 22" Rear Bag Rear Propelled High Wheel Lawn Mower ()

1 Answer

Craftsman lawn mower model 917,376673

Craftsman lawn mower model 917,376673 I am on my THIRD set of rear wheels for this mower. I paid for replacement wheels after the first failure; used the mower 5 times (approx. 40 minutes per time) ...

Question about Snow Blower / Snowblower Bottom Cover :

1 Answer

Snowblower won't go into gear after replacing wheels

snowblower won't go into gear after replacing wheels I removed both wheels and then replaced them. Now it will not go into gear. Do you still have the original wheels? You should be able to see some ...

Question about Professional 775 Torque 175 cc 21" RearWheel Drive Lawn Mower (CA) ()

1 Answer

How do I get the back wheel to stop wobbling and rubbing the side of the mower?

How do I get the back wheel to stop wobbling and rubbing the side of the mower? LOVE this mower but I noticed today the back left wheel was wobbling really badly when I mowed and was rubbing at times ...