Questions & Answers for: Homelite wheel

I need the gap dim between the fly wheel and the mag. Thanks , Rudy Sorry ! The saw is a 16'' super 2 .010 of an inch

...needle nose pliers or a little screw driver and where the cord go through the case and before the wheel. pull 5 to 10 inches out and wrap the cord around the wheel turning the wheel but not winding ...

Chain came off and now the chain pulley free wheels. Should there be teeth on the drive shaft to the pulley. If so, they have sheared off. Where is closest repair center to Flint MI, 48532? Yes, I ...

...do I change the line on my 25 cc homelite zip start trimmer 1) Use a pair of vise grips to open the wheel on the bottom of the feede; 2) Remove the wheel, taking care not to lose the screw inside it; ...

the right wheel fell off. I noticed that the little black piece ,almost like a lug nut, but not quite, that holds on the other wheel is missing. All i can find for parts is basically like a rod that ...

...starter rope , it has a strong pull back on your hands. the point gap is correct, and the fly wheel key is not sheared or broken. check the clearence on the stator between the pull cord

...to replace the pullrope, i disassembled the spring and put it back in, then the new rope and rope wheel, and put the cap back on top of the rope wheel with a screw. The problem is that my pullrop ...

i have ut 10519 cant get a spark. I have replaced the plug ,the ignition magneto twice, the fly wheel has good magnetism,and the distance between mag and fly wheel is set to a playing card width. ...

REPLACED PLUG BUT STILL NO SPARK FROM COIL The first thing I would do is replace the points and condenser. These parts may be under the fly wheel or just outside it.

...chainsaw Homeelite csp-4513/4518/4520 After some use sawdust can cover over the rotating magnet in wheel which passes coil to create spark.remove cover and clean or can try blowing out with ...