Questions & Answers for: wire an alarm

...There should be a yellow wire on the alarm module called accessory wire. This wire needsto be tapped into the thick yellow wire in your ignition area. For more help eail me at

...and attach a purple alarm wire to the other end of the cut starter wire. This in turn gives the Viper control over the starter wire. If you can bypass this connection then your vehicle should

...alarm is wired between the ignition coil wire coming from the ignition switch if the car is turning over and just wont start. This can be complicated because of the amount of wiring, You have to cut ...

...alarm all at once try disconnecting one wire in a time and finding its mate. The wires or color coded. For example, black with an orange tracer. This would mean it's a black wire with an orange line ...

...Alarm Disarm Wire (-): Disarms With Factory Remote Only. Factory Alarm Disarm Wire Location: N/A Factory Anti-Theft System: Transponder Anti-Theft System, Requires Bypass And Extra Ignition Key. The ...

...alarm wire to the relay in the manner described by the tech advisor. 10. Locate the wire that works the courtesy light if the alarm has current sensing. 11. Connect the current sensing line from the ...

wire is going to your alarm light. That is the wire or wires that need to be removed and rewire the direct wires for ignition. Be sure to get all alarm system wires and components under dash out. From

wire on the alarm . Most alarms draw power from the thick power wire some have a small power wire and Small ignition wire input that needs to be hooked up also. Only ignition one needs to be hooked up

...whether battery operated or hydro. Even with a battery alarm if you run wires to another alarm the fire can burn the wire in one room and short the one in another room. Causing both to not

wire fire alarms together you may not have the coverage you should have. If you have a fire alarm in one part of a house and put another one hooked to it then if a fire puts the power out in that part