Questions & Answers for: wiring running lights

lights and running lights don't work I Instaled trailer lights on my 2002 Olds Alero. This is a five wire system that goes to a four wire system. I hooked everyhitng up according to the directions but

Ad

Question about 2002 F250 Super Duty SuperCab

1 Answer

...wiring on my trailer and cannot get the lights to work other than the passenger side running light. I went to the harness with a test light and was only able to get current at the running light. No ...

Ad

Question about 3 Way Lighted Rocker Switch Iv

1 Answer

out of the light box i have three sets of wire one main power other different room light and the other is current light how do i combine wires so the switch to the bedroom runs the bedroom light ...

Question about 3 Way Lighted Rocker Switch Iv

1 Answer

...the light themselves. You will need a light with a dual element socket instead of a single element socket. Connect the "running lights' wiring up with any of your dash lights wiring. Good Luck ...

Question about 3 Way Lighted Rocker Switch Iv

1 Answer

...running lights from the factory. On all four lights, I'm going to guess (without testing that's the best I can do) that the black wire is a ground wire at least on the units with three wires. ...

...signal and blue for running light and the bike factory wires blk for ground and purple for turn signal. so where do you hook up the blue wire at onto the bike so i can have running and brake lights

...running lights. can't find bare wire anywhere. Not necessarily a bare wire. Could just be a slight broken spot in the insulation. Check the wiring inside the rear fender. Sometimes the tire ...

Question about 2007 FLHTCU Ultra Classic Electra Gilde

0 Answer

running lights wiring turn signal and running lights 3 wire hook up blue,black and purple what about the wire coming from running light Hi Anonymous, for a free wiring diagram please visit the website

Question about 1993 XLH Sportster 883 Deluxe

1 Answer

...lights (2 wire system) to a 3 wire (original) The 3 wire is a running light/turn signal combo. On the three wire you have neutral, turn sig hot and running light hot. If you want the two wire bullet ...

lights in place of that head light without too much wiring work. I don't need hi/lo option one wire will for high beam one wire will be for low beam the last wire will be ground wire as fog light have

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29492 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...