Questions & Answers for: Chrysler won t start

...won't start. It makes a noise like growling but does not turn over. My mechanic is saying we may need to rebuild bottom half but makes no sense that it started before. Im out 1500 dollars and ...

...won't start I changed the plugs and it 2.7 motor won't start I changed the plugs and it still won't start have you calibrated those plugs well ?   .050 inch its the gap calibration for ...

...won't start back up and it just spins fast then slows down like the battery is dead .I change the spark plugs and it still won't start.the oil dip stick re did the timing belt let go?sounds ...

...won't start, hear clicks coming from the fuse/relay box or just below it. Any suggestion? Won't boost, battery is tested and good (only 6months old btw). When I try to start it just clicks. ...

...won't start sometimes..sometimes it will and sometimes it won't..I don't really hear any noises when it's trying to turn over..I was told by the dealership that we bought it from 3 ...

...When the car won't start, first check: #1 power from battery #2 fuel delivery to engine. #3 ignition spark. If any one of these fail, engine won't start or at least won't

...won't start. Battery 2001 chrysler pt cruiser won't start. Battery replaced alternator is good and new starter clicks but doesn't start. Also replaced cables from starter to battery. Leave it ...

Won't start when facing uphill or flat only when facing downhill. The engine will turnover and it will just keep cranking, but it won't start when it is facing uphill or on a flat surface. ...

...right up. Drove it home, 3.5 hours later same thing; won't start. It turns over but won't "catch". Lights, door open ding works fine. my 2007 jeep compass will not get out of part what do i ...

...won,t start won,t turn over new starter ignition won,t start by key will start under hood with jumper wire check for power from the ignition in the start position to the starter relay/ solenoid ...