Questions & Answers for: Kenmore won t start

...won't start could be a faulty door lock as this is required to be locked before a signal is sent to the controller to start the wash cycle, try replacing the door lock, there quite cheal only a ...

...start it, but now won't do that. Hi, There can be many reasons why your dryer will not start or turn... The most common causes are the belt breaking or jumping off, or the motor goingbad... Here ...

...won't start. We've cleaned the filter and it still won't start. We've cleaned the fan area and it still wont work. What do you think the problem could be? Hi I believe that everything ...

won't start. I don't think it's a power problem because when I open the dryer, the light turns on. I've completely cleaned out all the vents and it still won't start. Hi, There can

...won't start, it was working just fine and then suddenly nothing. All the lights on the panel are on, the thing just won't turn. Take a look at this troubleshooting tip for the no heat problem ...

start switch. It then shuts off and won't restart for about 5 mins. Just before i try to restart the dryer i hear what sounds like a breaker switch popping. It then starts and I have to repeat the

...won't start, it could be a problem with your electrical panel or the door might not be closing properly. Check your household electrical panel for a tripped breaker or blown fuse. Also check to ...

...won't start, check to be sure there is power to the electrical outlet for the home. If that is OK, the power cord itself might be defective. This is rare. You can check the power cord with an Ohm ...

...won't start check to see if there is power at the electrical outlet which the washer is plugged into. Plug a lamp or radio into the outlet to check it. If the outlet is dead, check the circuit ...

...won't start, however I can hear it click. Like a car turning over but won't fire. Any suggestions? Already cha The door light works, however does that mean the switch does? I don't ...