...wont charge the battery. I also changed the neg cable cause I noticed coolant was leaking on to the connection. What could it be. voltage regulator needs ...
...place, it tightens the belt. then you secure it back with three bolts. The belt system in question connects the drive shaft with the cam shaft, So you do have to be Very Careful with the belt/
91 bonneville 3.8 v6 dies on long upgrades, wait awhile and it restarts. Runs ok on the level but under an uphill load and it loses power. Any help would be appreciated. ck fuel filter,,or kick down ...
...91 Firebird gets stuck in park and will not shift into drive or any other position. could this be because of the shift lock solenoid failing? what other issues could cause this? Could be the brake ...
Fig. Location of the fluid level sensor To install: Insert the fluid level sensor unit until the locking tabs snap in place. Attach the sensor electrical connector. Connect the negative battery cable
...the solvent level sensor and washer pump. Connect the hose to the washer pump. Fill the reservoir with washer solvent. Connect the negative battery cable, then check for proper washer pump
...switch is engaged get single loud click from area of starter, no other action. first check the connections on the battery, clean them well, if the problem persists the starter is going ...
...it acts as if theres something wrong with it. could it be the ignition switch?\ Double check your connections and make sure that the connections to the battery and starter a fully tightened down
Question about 1989 Firebird
91 Pontiac Grand Am just got my plugs and wires and oil changed and now when I drive it down the road it shifts hard an takes awhile to kick into gear please help me what can it be? transmission fluid
Question about 1989 Firebird
...over but wont start at all check ignition system --egr valve -fuel pump--cat converter--electrical ...
Usually answered in minutes!
1,771 Questions
1,538 Questions
1,504 Questions
1,435 Questions
1,496 Questions