...1) You can call XM or go to XM'S website. If you have not setup your account for internet usage you will have to do so before you can manage (reset) your radio. Once you reset your radio it may take ...
...etc? Thanks if you have a dual xmp6000 your radio has xm built in. If you bought it new it came with the antenna- all you would have to do is activate it-www.xmradio.com. or call ...
XM READY RADIO FOR THIS SIZE: H:1-15/16 D: 6-1/4 W: 7-1/16 I CANNOT SEEM TO FIND WHAT I NEED LOCALLY OR ON THE NET. IVE CALLED BEST BUY, BUT THE SALES GUY DIDNT KNOW ANYTHING!! PLEASE HELP!! IVE GOT A
...1: My ESN ID for my XM radio defaulted back to 000123456789. I'm still getting XM signal but appearently not with a valid ESN number. Issue 2: My deck has been buggy ever since I had XM radio instead ...
...1. XM will send a signal out to your XM radio to activate it. You will need to leave the radio tuned to channel 1 for 15 to 20 minutes to activate it. If you have additional questions or concerns - ...
Question about MyFi SA10113 XM Radio Receiver with Home and Car Kit
...1. Call XM (1-800-XM-RADIO) and ask them to "refresh" your radio. WAIT 1/2 hour, then check your channels. Make sure you have a decent signal too (can hear Channel 1 okay) before you call XM for the ...
...number. Then, make sure you have a good signal, leave radio on Channel 1 for 1/2 hours after calling 1-800-XM-RADIO and ask they to refresh your radio. They will tell you how long to wait -
Question about XM Direct 2 Mini-Tuner Car Kit for XM Ready Aftermarket Radios Satellite
...do is call 1-800-XM-RADIO with the serial number from channel zero. Leave the radio on channel 1 for 30 minutes after calling, and you should then be activated. Let me know if you have more
Question about XM Direct 2 Mini-Tuner Car Kit for XM Ready Aftermarket Radios Satellite
...XM channel 1,and that will help you with antenna setup. I highly suggest using the remote XM antenna. The built-in XM antenna need to be put 'propped-up' outslde, otherwise you have to use the ...
Question about 2010 Spark 1.2
...ignition switch in the ACC position and the radio ON, tune to the XM channel 1 for 30 minutes to activate XM service. Once activated, the radio will receive the remaining XM channels. XM is trade ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions