...mixer that has phantom power. Without the phantom power supply, the microphones active circuitry will not be able to work.. Good luck, any problems getting your rig up just ask. A "FixYa" rating for ...
yamaha model mg10-2 mixer and cant seem to get sound out of the mxl, however i have an older mic that if plugged in to the same in put works fine...i have this running through my desktop computer with
...power. Check your mixer and see if it has 48v phantom power. The only computer soundcard that I know of that is used by a lot of folks is the M-Audio Delta 1010LT. It has XLR inputs but NO phantom ...
...phantom power source from something such as a mixer. Then plug the mic into the mixer and the mixer into the LINE IN on the PC What you may need is something like these: X2u XLR to USB Signal ...
power converter and a tascam mixer with no problems. With both sources i have used an xlr-xlr to the phantom power source, then an xlr-1/4" jack to my computer and all worked fine. The old tascam
Question about 990 Professional Microphone
...mxl 990 works with behinger usb 302 mixer?? usb 302 behinger mixer The user manual says Phantom Powered Mic input which means you should be able to use a condenser microphone requireing Phantom
...Power from and external source, such as a good mixer. Make sure your mixer has it available and it is turned on. Then make sure you have a good and properly wired mic cable. If these suggestions do ...
...V67 MIC doesn`t work If this is a condenser micrphone it will require Phantom Power from the mixer you are trying to use it with. If Phantom Power is provided, check the cable to ensure proper
Question about 770 Professional Microphone
...you say "plugged into the amp", this is a condenser mic which requires power from a power supply or phantom power from a mixer. If your plugging it directly into an amplifier, it defiantly won't
Question about 770 Professional Microphone
...is picked up What should i do ensure phantom power is on and use xlr to xlr cable to connect to mixer. ensure that the channel is set tro mic and not line input. refer to mixer manual for more
Usually answered in minutes!
22 Questions
9 Questions
3 Questions
4 Questions
1 Questions
