camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse ...
...Z612, the problem is that when you turn on the camera the green light flashes four times then shuts off. The only position the camera turns on at is when it is in the Favorite mode and shows the Demo ...
The menu button will not work. I can not switch to the memory card and other features other than the external memory Difficult one so go to http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=687&
Question about EasyShare Z612 Digital Camera
Z612. The camera indicates formatting required. How do I format or are they compatible? You simply insert the memory into the camera, switch it on, go to the menu and then scroll through to Format and
menu button dont work That is a repair if OoW. the repair price is: 24,47 pounds. Contact KODAK: http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490
Question about EasyShare Z612 Digital Camera
...Z612 uses SD cards. Your 4GB card is actually an SDHC (Secure Digital High Capacity) card and is incompatible with SD devices. For SD cards (2GB and smaller), you'll find the Format operation in the ...
Question about EasyShare Z612 Digital Camera
...z612 is abou 4 years old. Recently it develop and gave a signal "internal memory is full". I purchased a new larger capacity memory stick and after five photos it again displayed the same ...
Question about EasyShare Z612 Digital Camera
z612 camera says memory full even though I purchased a new memory stick. The response said to go to menu and click the "format" display and follow instructions. However, I am unable to find
flash does not work this can be either a physical fault (the flash is damaged and need to be changed) or a setting one ... For the setting issue look in th main menu and at the flash feature ..look to
Question about EasyShare Z612 Digital Camera
MENU button, use cursor-up/down to select the wrench icon and press the OK button, use cursor-up/down to select "Format" and press OK.Be aware that the Z612 only works with cards up to 2GB in size. If
Usually answered in minutes!
1,383 Questions
1,133 Questions
959 Questions
944 Questions
808 Questions