...zebra 140xiII printer getting "error head open"...we have reinstalled the ribbon and paper, cleaned the paper path and laser eye, but still getting "head open error" when the lever is definitely down ...
Zebra LP2844 thermal printer the print on my labels has begun to fade how can i improve this open the unit and on the front top you will see a thermal print head, (looks like a shiney bar) using an ...
Question about 220XiIII Label Printer
Zebra 220xiIII Error Condition Head Open will not go away I tried every thing I could think of to clear this message on my zebra 200xiIII, but I cannot seem to clear it. Any advice, thanks in advance.
Question about Thermal S4m Dt Zpl 203dpi Rs232/par & Usb Label Printer
...zebra printer s4m is saying ALERT CLEARED HEAD OPEN, ALERT RIBBON OUT Alert Head Open will show everytime u open the Head , when u close back the head it will show Alert CLeared Head Open, then it's ...
Question about 105SL Thermal Label Printer
Head is open" but Our Zebra 105SL is saying the "Head is open" but it isn't any thoughts on what to do? Open the side cover and to the top right is a sensor for the printhead, open and close
...head full until it has contact with the magnet on the inner side of the housing, than close again and press pause key to release printer from pause mode. If calibration is activated, the printer ...
...Zebra Z6M Printer. It will try and print a label but then stop after 2cm and say the paper is out. Error Condition Paper Out I then open up the printer and open and close the print head and the error ...
Question about ZM400 Thermal Label Printer - ZM400-3001-3000T
ZEBRA ZM400 CUANDO SE ENCIENDE APARECE EN LA PANTALLA LCD, EL MENSAJE HEAT OPEN, COMO QUITARLO? there is a possibility that you need to just the print head assembly, if when its at close position, the
Question about ZM400 Thermal Label Printer - ZM400-3001-3000T
Zebra GX430T ERROR CONDITION HEAD OPEN this printer is no longer supported by zebra. i could not find a service or parts manual but i can say there is a switch inside it that is made when you close ...
Question about ZM400 Thermal Label Printer - ZM400-3001-3000T
ZEBRA 105SLPlus,I need HELP Error HEAD OPEN (head not open!)I turned off the printer from the power supply and from the computer,still flashes DATA and I cant reset printer to factory default?! try ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions