2wire Computers & Internet - Recent Questions, Troubleshooting & Support

Question edited for a lot more clarity.

2Wire 1000-100016-002 - Default login IP, default username ...

192-168-1-1-ip.co https://www.192-168-1-1-ip.co > router > 1000-1000... To get access to your 2Wire 1000-100016-002, you need the IP of your device, the username and password. You'll find such information in the Manual of your ... https://www.hardreset.info/devices/2wire/2wire-1000-100016-002/faq/manual/manual/ https://www.google.com/search?q=2+wire+1000-100016-002+manual ..

do not worry you just reset your wifi router it will present on the router there is a image :-

Hey Capb, sounds like this "modem" is set up differently from the old one in that it is separating the wired and wireless network traffic. If you are a little technical, you might check the IP addresses of both devices and see if they are on the same networks segment.. like 192.168.1.100 and 192.168.1.101 or some such.

This is a problem with the connection not the Roku. Also things that can effect this is now many Movies you have in your Netflix Instant Que. Deleted some of the Instant Que movies and reboot the Roku. See if this will FixYa up.

here you go, the short answer. Just a simple re-wire and reconfigure (see attachment).




For the hub I recommend one of these (I have one and it's pretty much plug in play):
http://cgi.ebay.com/TP-Link-8-Ports-10-100-Fast-Ethernet-Network-Switch-Hub_W0QQitemZ330239125851QQihZ014QQcategoryZ51268QQcmdZViewItem?refid=store

You once have to check once that which operating system you are using and check the DHCP and firewall Settings too. You may also check Linksys router support here you get more about Routers. For more Information regarding Routers Visit:https://www.routertechnicalsupportnumbers.com/linksys-router-support/

Buy Zocon-T Kit (Fluconazole/Tinidazole) is used to treat the symptoms of various va*inal yeast infections including vag*nal trichomoniasis, va*inal candidiasis, and bacterial .

The default IP address varies depending on the ISP you are using and the software version.

The common IP addresses are:

• 172.16.0.1
• 192.168.0.1
• 192.168.0.254
• 192.168.1.254

3D Silk Lashes 3D Silk Lashes China Manufacturer Private Label Silk lash Free Sample Factory price for premium 3d silk lashes with our own brand or your Individual brand 3d silk lashes. You can get hot fashionable 3d silk lashes made by 100% handmade Korean synthetic fiber. Our black band and invisible 3d silk lashes is very thin, soft, strong and very comfortable to wear. Shop the best selling lashes http://www.minkfurlash.com/3d-silk-lashes

the only thing you need for connecting 360 to wireless is an Internet connection, an 802.11G wireless router, and a wifi adapter that connects to your 360. They have these at walmart or any gaming store. I suggest giving your 2-Wire back to ATT! NOT QUALITY. Especially for gaming.
I myself prefer my box to be hard wired as lag is far less. BUT..for wifi
Get a Linksys Router and XBox brand wifi adapter for 360. Also google xbox connect. Instead of paying for LIVE

James Mac

On your 2wire router is model number, below that is another set of numbers, from network connections select your 2 wire router, then connect. it will ask you for a password, The password is the set of numbers below the Model No.

Have you figured it out yet?

Are you referring to cable modem with WiFi router?

Reset your wireless router to factory settings. On the back or bottom of your router, you will find a small hole perfect for a paperclip to be inserted. While it is plugged into power, press an unbent end of a paperclip into the hole firmly for 30 seconds then release it. Your router should now be at the factory settings. You will need to set up the router very quickly to change the factory Admin password so that nobody else can get into it. Get your setup instructions online by going to the router's manufacturer page to find the manual for your specific router.

You'll need to contact your ISP and have the DSL service moved to the new line. The laptop sees the mdem or router and thinks it's connected, but the red internet light tells you the connection is not complete to the phone company.