AEG Cooktops - Answered Questions & Fixed Issues
I Bought Prestige induction stove
E5 or E0 means that the stove is getting overheated. You have to reduce the temperature for it to stop. It goes on with few beeps and then stops.
7/18/2021 7:13:15 PM •
AEG 23 in....
•
Answered
on Jul 18, 2021
•
4,126 views
Hob not working
It is child lock.
Turn cooker on, press two + at front of oven, this will then take it off for that cooking session.
To turn child lock off switch on hob, and touch - for 5 seconds.
7/2/2013 11:34:27 PM •
AEG 23 in....
•
Answered
on Jul 02, 2013
•
1,504 views
I get E9 error from
If its a Rangemaster induction cooker, I had the same problem and its caused by a Loose or faulty PT sensor under the glass, you need a qualified engineer to rectify it.
9/30/2017 1:36:28 PM •
AEG 23 in....
•
Answered
on Sep 30, 2017
•
8,331 views
Change fuse cooktop electrolux
Hello mons_sorense - Usually this type of information is not release to someone who is not a technician (or to a consumer) and it is very rare to find enough information to do it yourself. In most cases this information can be found on the internet; however it is not provided directly from the manufacturer. Typically this is something that you want a certified professional to install/remove for you due to safety and liability reasons. They also usually warranty their labor just in case something else may turn out to be the root cause of your initial problem and it does work out better to your advantage. Consider contacting your manufacturer for more details on who in your area can properly repair/install this part. (part usually have a 30 day warranty with tech). I would suggest contacting your manufacturer to provide you a listing of authorized technicians in your area whom may guide you through this process.
12/14/2012 7:26:52 PM •
AEG 23 in....
•
Answered
on Dec 14, 2012
•
350 views
My prestige induction cooktop PIC
It is possible that there is fault in the circuit as the drive section seems to fault when the current requirement is high. It is also possible that there is a component possible a semiconductor- MOSFET- that has gone weak during the power outage and so fails .
It is best to have it checked now as it might save a larger expense if the whole unit fails. Also someitmes it can be a silly dry soldering which can be done up immediately. So get support if youa are not able to DIY.
7/22/2015 6:55:00 AM •
AEG 23 in....
•
Answered
on Jul 22, 2015
•
1,715 views
Installation manual aeg 32kw 380volts
Try
mauritron.com
They have the world's largest library of
owners user instructions operating guides
and
technical repair schematics circuits service manuals
I'm not connected to them, just a satisfied user.
Also if you don't find your item in their listing then ask and they will get it for you
8/23/2011 8:11:51 PM •
AEG 23 in....
•
Answered
on Aug 23, 2011
•
229 views
UNLOCK THE LOCK OF CHILDREN IN CERAMIC
Hi and welcome to FixYa,
I can not insert the symbols here to properly answer your question so, I found the manual and you can read the steps on page 9 here:
http://awadnahas.net/pdf/UserManual/bf7e9e9b-cc9e-46fc-94a7-5965a2d61b18.pdf
This is copy and paste from the manual and the symbols will not come out:
Switching off the child safety device
• Start the hob with ( ' ). Do not set the heat settings . Touch for (Up arrow) 4 seconds. The
symbol ( 0 ) comes on.
• Stop the hob with ( I )
The symbols I typed above are not 100% as they appear in the manual.
Thanks for choosing FixYa,
Kelly
AEG FM 4500GR-a PNC 941177468:
Keeps
Possible there is short in the oven heater. You will need to check individually the circuit for short or leak into the circuit. Also if the trip is on a ELCB then this is due to an earth leak. Please check if there is leak on the wiring or a possible poor earth/ground connection at the outlet.
5/9/2011 12:22:07 PM •
AEG 14 in....
•
Answered
on May 09, 2011
•
182 views
How to un lock
My hob unlocks with that I turn on the hob and the the L appears, then I hold down the lock button until it disappears then I push the STOP/GO button.
3/25/2011 12:23:20 PM •
AEG 23 in....
•
Answered
on Mar 25, 2011
•
657 views
Not finding what you are looking for?