Alpine Recent Questions, Troubleshooting Help & Support

1. Mechanical Issue: There might be a mechanical problem with the disc drive or the eject mechanism. It's possible that a part is jammed or not functioning correctly.
2. Dirty or Damaged Disc: If the disc is dirty, scratched, or damaged, the player may have difficulty reading it and thus not ejecting it properly.
3. System Error: There could be an internal error within the player's software or firmware causing it to not recognize the disc properly or to malfunction when attempting to eject it.
4. Power Issue: Sometimes, power-related issues can affect the functionality of electronic devices. Ensure that the player is receiving adequate power and there are no loose connections.

Here are some troubleshooting steps you can try:

• Turn off the player and then turn it back on to see if it resolves the issue.
• Try ejecting the disc using the manual eject button (if available). This button is usually a small pinhole near the disc slot. You can insert a paperclip or a similarly sized object into the hole to manually eject the disc.
• If possible, try using a different disc to see if the problem persists. If other discs work fine, then the issue may be with the original disc.
• Check for any visible obstructions around the disc slot and remove them if present.
• If none of the above steps work, you may need to contact Alpine customer support for further assistance or consider taking the player to a qualified technician for repair.

Se o Bluetooth do seu Alpine CDE-W235BT parou de funcionar ap?s uma falha durante a atualiza??o, pode haver algumas etapas que voc? pode tentar para resolver o problema: 1. **Reinicie o Aparelho:** - Desligue o r?dio por alguns minutos e ligue-o novamente. Isso pode reiniciar o sistema e resolver problemas temporariamente. 2. **Restaurar as configura??es de f?brica:** - Consulte o manual do usu?rio para descobrir como realizar uma restaura??o das configura??es de f?brica em seu Alpine CDE-W235BT. Isso pode resolver problemas causados por configura??es incorretas. 3. **Verifique a vers?o do firmware:** - Se poss?vel, verifique a vers?o do firmware do seu Alpine CDE-W235BT. Se houver uma vers?o mais recente dispon?vel, considere atualizar novamente o firmware, seguindo rigorosamente as instru??es do fabricante. 4. **Remova Dispositivos Pareados:** - No menu Bluetooth do r?dio, remova todos os dispositivos pareados anteriormente e, em seguida, tente parar novamente. ?s vezes, problemas de conectividade podem ser resolvidos removendo e pareando novamente os dispositivos. 5. **Atualiza??es de Software:** - Verifique se h? atualiza??es de software dispon?veis para o seu Alpine CDE-W235BT no site do fabricante. Caso existam, siga atentamente as instru??es para realizar a atualiza??o. 6. **Contate o Suporte T?cnico:** - Se as solu??es acima n?o resolverem o problema, entre em contato com o suporte t?cnico da Alpine. Eles podem fornecer assist?ncia espec?fica para o seu modelo e orienta??es adicionais para resolver o problema. Lembre-se de que mexer no firmware e nas configura??es do dispositivo envolve riscos, e ? sempre recomend?vel seguir as instru??es fornecidas pelo fabricante para evitar danos permanentes ao aparelho. Se voc? n?o se sente confort?vel fazendo isso por conta pr?pria, procurar ajuda profissional pode ser uma op??o.

Question edited for clarity. https://www.google.com/search?q=alpine+vie-x077+wiring+diagram https://www.google.com/search?q=alpine+vie-x077+installation+manual ..

After researching, it appears that there is no direct evidence suggesting that the Alpine TDM 7543 stereo unit has the ability to switch from green to red lighting. This is an older unit and specific information can be challenging to find. Your best option to get a definitive answer may be to directly contact Alpine's customer service or refer to the original instruction manual.

limited info ---dealer ----or search for a tuner forum ---Asian import forums ---automotive electronic shop

Help here https://www.google.com/search?q=hange+the+language+of+my+alpine+car+stereo+(700w)+to+English ..

I found wiring diagram at 2000 Dodge Ram 1500 Stereo Wiring Diagram ' Dodge durango, Dodge dakota, Dodge ram 1500 (pinterest.com) and wiring color codes at 2000 Dodge Ram Pickup Car Stereo Wire Colors and Locations (the12volt.com) but I recommend to consult an auto electrician for authentic connections.

ck here.. http://forums.pelicanparts.com/porsche-911-technical-forum/116178-alpine-tdm7543-head-unit-removal.html

mr david,i recommend inspecting the subwoofer's voice coils visually for any signs of damage, such as tears or burns, and r double-checking your wiring connections

the number is in your car manual on a card usally about 4 digits

If your Alpine INE-S920HD head unit keeps shutting off after a few minutes of starting the truck and your backup camera appears dark, it could indicate a power or wiring issue. Here are a few steps you can take to troubleshoot the problem: Check the power connections: Ensure that the head unit's power and ground connections are secure and properly connected. Make sure there are no loose or damaged wires. Check the fuse for the head unit to ensure it is not blown. Verify the power source: Confirm that the power source you are using for the head unit is stable and providing sufficient voltage. Consider checking the vehicle's battery and alternator to ensure they are in good working condition. Inspect the wiring for the backup camera: Check the wiring connections for the backup camera, including the power and video cables. Ensure that they are securely connected and not damaged. A loose or faulty connection could cause the camera to appear dark. Adjust camera settings: The dark image from the backup camera could also be due to incorrect camera settings. Check the settings menu on the head unit to adjust the brightness, contrast, or other image-related settings for the backup camera. Reset the head unit: Perform a factory reset on the Alpine INE-S920HD head unit. Refer to the user manual or contact Alpine customer support for specific instructions on how to reset the head unit.

There is an Owner's Manual for $80 on eBay. Also Service Manuals. They were fitted to Porsche. https://www.google.com/search?q=alpine+7164+manual ..

Does it play the tuner but not the CD?

If it so, the problem is directly related to the CD deck. If not, the problem could be a sensor or any number of other components that may have overheated.

Try to reset the unit. Most of the time this error is an electrical problem not fixable by the end user. But it is worth trying to reset the microprocessor and see if that helps.

Here is a diagram of where the reset button is at. Press it in with the tip of an ink pen or paperclick, whatever you have that will fit into the little hole. Just hold it in a couple of seconds. Be advised that when yo reset the unit, you will loose all things in memory like the correct time, preset radio stations ect.

If this does not help you will need to have it checked out by a good repair center. These Alpine radios are very good radios and are worth getting fixed unless the estimate is close to what you paid for it.

good luck, I hope this helps. if so, a good rating would really be appreciated. You can always ask me for more help if you need it. I have been repairing car and home audio equipment for over 17 years.

There are only three ways to get the code. https://www.fixya.com/support/r29874205-need_vehicle_radio_code ..

ask maker for support, (updating down dates to deathh)

It sounds like you're having a problem with your Alpine Navi INE-Z928HD. I suggest that you first try to download and install the latest firmware update for your device. If that doesn't resolve the issue, then you may need to contact Alpine's technical support team for further assistance.

You can find a wiring diagram for an Alpine 7901 CD stereo online. You can search for the specific make and model of your stereo to find the diagram. Alternatively, you can contact the manufacturer of your stereo to request a diagram.