Amana Cooktops - Recent Questions, Troubleshooting & Support

Hi,
Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking
http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

call the retail estate agent and have it fixed It is not your position to fix rental property equipment

The glue is reaction to the microwaves , You should use a glue recommended by the manufacture

Tell him as it is .

Here's a link,is this same as yours. Range LOC message on Display

Hi Sally: I'm sure they would like to know. Could you post this message as a comment on your original request? That way they'll be sure to see it. Thanks.

Your display is actually reading "SAB". This is an indication of a mode of operation rather than an error code. The following link explains: http://www.fixya.com/support/r3608491-sabb_or_sab_explanation_kitchen_ranges Sabbath Mode is a feature that allows the consumer to disable certain features of the range in order to honor the sabbath. Usually this disables the oven, but allows the consumer to still use the surface burners. You cannot defeat it by unplugging the range or turning off the breaker either. You will either have to wait 72 hours for the mode to clear, or figure out how to turn it off. Somewhere in the owner/operator's manual is a section that refers to "Sabbath Mode". Since all ranges differ in features and operator, you need to refer to the operation section of your owner's manual to find out how to shut the feature off. If the model number you listed this question under is correct, you need to press and hold the CLOCK button for 3 seconds to clear the Sabbath Mode. "Sab" will flash for about 5 seconds, then return to normal display.

Hi Sally, let me try to help you. The category I am seeing is Amana 30" self-cleaning range. You are having clock setting issues. I need to know the model number to be able to research the issue and get back to you. Please add the model number with a comment on this question. Don't enter a new one as this will confuse others. I will get back to you as quick as I can with either an answer or to let you know what I can or can't find out on the issue.

Can you post more details like: Does the oven ignitor come on (glow orange)? Can you hear the oven gas valve click open and/or smell gas? Do all the stovetop burners work fine? Have you checked your propane tank to be sure you are not out of gas?

Do you have power? Check to make sure the power cord is plugged in. Check for a reset button where it's plugged in to the wall. (It may be tripped). Check your breaker box for a tripped switch.

You will only need the make and model of the cooktop to order the ignitor. Open the bottom drawer below the oven to find the data plate with model & serial #'s on the front of the oven.

Most modern ovens have a glow bar ignitor, not a spark ignitor. It will glow a bright orange and then the oven valve will click open and allow gas through and the burner lights. Many gas ovens have a small shutoff handle located on the silver appliance regulator, which is located either behind the stove or at the bottom behind the oven drawer. Make sure it has not been accidentally closed. It will cut off gas to the oven only.

on most, your push down and turn to hi to open gas valve and turn on piezio to light burner. it sounds like you have a knob already turned on . the control under the knob may need replacing. kinda an easy replacement if you get new part. check out repairclinic.com for video(maybe) but for parts for sure. be careful. gas is explosive.

There is no fix. This is normal. All 4 ignitors will spark but the gas will only go to the burner where the gas is active.

How to locate and install a turn signal flasher fuse and 92' izusu rodeo

It could be locked, the valve could bed closed. r clicking is just an electric switch I would make sure the gas is turned on somewhere

Try turning off power to stove for a few minutes then re try