Audiovox Televison & Video - Recent Questions, Troubleshooting & Support

It's possible that the issue with your Audiovox pursuit PRO9056c remote start system is related to the antenna or its connection. Here are a few things you can try to troubleshoot the issue:

1. Check the antenna connection: Make sure the antenna is properly connected to the control module of the remote start system. You may need to remove the panel where the antenna is mounted to access the wiring and connections. Check the wiring for any signs of damage or corrosion, and make sure the connections are tight.
2. Check the fuse: The remote start system may have a fuse that is responsible for powering the antenna. Check the fuse to make sure it is not blown or damaged.
3. Reset the system: Try resetting the remote start system by disconnecting the battery for a few minutes, then reconnecting it. This may help reset the system and resolve any issues that were causing it to malfunction.
4. Consult a professional: If you are not familiar with automotive electronics or are unable to resolve the issue with the above steps, it may be best to consult with a professional technician who can diagnose and repair the system for you.

It's also possible that there is a problem with the remote start system itself, such as a malfunctioning control module

See if the videos and articles help. https://www.google.com/search?q=connect+a+Roku+2+to+an+Audiovox+ADV12 ..

Unfortunately, you are probably dealing with a copy protection issue. The digital handshake can't be returned by your KLV3913. You get the same issue if you connect a HDMI source (Blu-ray player) to a VGA monitor. I wish that I had better news for you. Cindy Wells

It's all one board, chances are your audio output IC has failed and needs replacing

there may be a subtitle button on your remote. After pressing if it doesn't work then there mayn't be subtitle available on your dvd disc.

https://www.rcaaudiovideo.com/docs/common/RCR3273R/RCR3273R_OTHER_CL.pdf

DVDs are ecoded with region codes to indicate what area of the world they are made for. These codes may be 1,2,3, etc depending on which region they are made for.
DVD player read these codes and if the disc region code does not match the region the device is made for, the player will not play the disc.
Region 1 is for USA so most DVDp players made for use in USA require region 1 discs.
Some DVD players called multi region DVD players can be set to play different region DVDs but they are typically more expr=ensive then one region players and the code must be changed each time a different region disc is played.

I cleaned the lens, but I also tip the play upside down with the disc in it and it seems to work.

DVDs have region codes to prevent black-market selling of them and whatnot. Where did you buy the DVD? Where did you buy your DVD player?
R
I don't think so. What if you moved to another country? What if you decided to take your player on your yacht and sit out in international waters watching DVDs?
R
Try deregioning the hardware. Get the make and model number and enter it with "de-region" or "DVD region hack" into google. You may find instructions for de-regioning the player. It usually consists of taking any discs out, restarting the machine and then entering a number code that allows you to set the region to "0". Most of the cheaper, Chinese-made DVD players have a work-around like this. Post the model and maybe I can find it for you.

Jim, First thing I would do is try a different DVD to see if the problem persists. Otherwise, this device is equipped with integrated speakers, meaning it is unlikely that you will be able to replace them. You may be in the market for a new Audiovox, unfortunately; but before you scrap it I suggest taking it to a local electronic repair store near you. Hope this helps, Best regards

I I had a similar problem. What worked for me, was resetting the player. By pressing the picture button on the player itself three or four times I got to the reset option. Press play when it says press ok to reset. My remote automatically started working at that point. Hope this works for you

are you using the right remote, one time i tried to change things and come to find out it was on the dvd not the tv