Behringer Music - Page 6 - Recent Questions, Troubleshooting & Support

http://ewp.koncon.nl/images/ewp/manuals/mixers/eurorack_mixers843.pdf Free manual online at the link above:

Hi Ezra, for the failure you describe, you may have a problem with the Main Insert connectors, more presumably on the left, this connector has the function of interleaving some type of processor in the stages of the master L and R, and has some contacts internal that get dirty and produce false contact in the passage of the output signal Try cleaning it with some contact cleaner, put a small amount of cleaner and with the help of a plug, put it on and take it out several times in order to make the cleaner work, do the same with the right channel, because the same fault will appear. , sometime If this does not work, you would apparently have problems with the left master dimmer potentiometer on the corresponding electrical circuit I sent you the link to download the user manual of your Behringer I hope you serve my suggestions and manage to make the left exit work Greetings Franco Dosil Hola Ezra, por la falla que describes, puedes tener un problema en los conectores Main Insert , mas presisamente en el Izquierdo, este conector tiene la funcion de intercalar algun tipo de procesador en la etapas de los master L y R, y cuenta conunos contactos internos que se ensucian y producen falso contacto en el paso de la se?al de salida Prueba limpiarlo con algun limpiador de contacto, pon poca cantidad de limpiador y con la ayuda de un plug ve colocandolo y sacandolo repetidas veces a los efectosn de que el limpiador actue, haz lo mismo con el canal derecho, porque ya le aparecera la misma falla, en algun momento Si esto no da resultado, aparentemente tendrias problemas con el potenciometro atenuador master Izquierdo on el circuito electrico correspondiente Te envio el link para que descargues el manual de usuario de tu Behringer Espero te sirvan mis sugerencias y logres hacer funcionar la salida Izquierda Saludos Franco Dosil http://www.manualsbase.com/es/manual/downloadmanual/119881 https://manualsbrain.com/es/manuals/809021

Likely a Neutrik s102-84 PCB mount jack. Common at amp repair sites online.

I assume you have the neutron connected to the computer via a USB cable. Right? What kind of cable are you using between the neutron and the workstation? Will the neutron play midi coming from the computer? Does it interface with Band in the Box or a software sequencer (Logic,etc)?

Audio Equipment: Is the loud popping sound when you plug/unplug your speakers bad for them?
Most speaker cones are driven from a power amplifier.. The pop - like you said - is a transient spike. But the important thing here is that it gets amplified up through the pre-amp and into the power amp.. Speakers usually move in the ol' in-out fashion with respect the the voltage at the input.. and a big spike could loosen the cone from its suspension mechanism.. The higher the power and the more delicate the cone - the more the danger to the speakers ( what is normal for a woofer cone, could end blowing up a tweeter cone) . For e.g. In live events, where high output PA speakers are used, this is a very serious issue - because such a spike could throw the speaker cone out of its place, and it wouldn't work from that point on. For this reason, some high end audio equipment have a limiter at the output, that prevents signal from exceeding a certain predefined limit. So any occuring transients would never hit the cone at a level that is unhealthy to them.

Most home audio equipment tends to operate at lower levels. That being said, there is still some damage inflicted on the speakers - just maybe not of the same magnitude.. especially the smaller ones.

If your system has a remote control, it might be wise to hit a mute button just before you change to another input... or maybe find a way to turn off just the speakers (if separately powered) before you interchange the connection

Yes you can, but the questions is should I. the answer is no, unless you have the money to new equipment. Why would want to connect another amp? If some tells you can do it ask for a deposit equal to the price of new equipment.

That would depend on exactly what make and model sub you're using, but one possiblity would be to run it of the 1/4" main output jacks next to the XLR outputs.

I would guess this is less than 3 years old and assuming you registered you will have a 3 year warranty so they'll probably fix it for you FOC

You probably need a new adapter. If not the power supply board inside might have a problem.

FIlter capacitors in the positive supply are likely failing. These will be the larger metal cans- one may be bulging. Either way, one of them is shorting out after a certain voltage potential is achieved and causing your problem.Replace the caps in both the positive and negative power supply sections and this should alleviate the issue. Match the working voltage rating, or even one step up in working voltage. yours are likely rated 25 volts, so a step to 35 volts would not pose an issue.

The Phantom power comes from a seperate winding on the switching power supply.Likely one or more of the other voltages are not present due to a failure of one or more components. The supplies are current limited so a short anyplace on the board may cause the problem. I had one of these short betwen the +/- 15 volt busses because somebody spilled liquid into it.

Here is a close schematic... a slightly different model with less channels, but circuoitry is the same, just more copies of it in yours: I believe it is zipped with four files... the last is the power supply.

http://elektrotanya.com/behringer_xenyx-1222fx_v1000_dpm5m_ub-spsu2_sch.zip/download.html

Check out the left channel with an ohmmeter. Be sure to unplug it from everything. Even though it's newit still could be defective.

Bad switch

Your question appears in the Food Mixers category, which appears to be a mistake using the word mixer.. I searched the internet using Google.com and only found the dmxp6 mixer for sale, but not a manual. You might try contacting the manufacturer of technical pro mixers. https://www.tpro.com/pages/technical-support

I just started 6 weeks ago and I've gotten 2 check for a total of $2,200...this is the best decision I made in a long time! "Thank you for giving me this extraordinary opportunity to make extra money from home. This extra cash has changed my life in so many ways, thank you!" Visit site: http://w­­w­­w­­.SalaryHD­­.­­C­­o­­m

Go here on Youtube and see if any of the videos contents are close to your unit. https://www.youtube.com/results?search_query=disassemble+behringer+pmh+880

I doubt there is compatibility. http://www.fixya.com/support/t25995684-driver_umx49_os_windows_10 If it's worth it to keep using this unit, consider buying a good-enough cheap PC based computer with Windows XP. XP is no longer supported, but it's still useful, and it;'s one of the most stable OS's they ever released.

make sure its the proper power adapter. If its not it will introduce all sorts of noise. I would use a proper adapter from behringer. Of one of the adapter damaged the internals.

No, sorry, FIXYA is an internet only free service. It is aimed at "do it yourself" questions.

Guys you can also visit http://windonskey.blogspot.kr/2016/05/windows-10-preview-product-key.html to get genuine and cheap windows keys to activate your windows.