Brother FAX - Recent Questions, Troubleshooting & Support

I was looking for one hour some drivers, coudn`t find even on original website this model, try to install some different model, sometimes it works, sorry I can`t help you. Or you can download some portable program to find the driver, just download and unpack, turn on the printer and open this program http://www.tactools.ru/iobit-driver-booster-pro-1-1-0-551-final-datecode-26-11-2013-portable/?utm_source=rss&utm_medium=rss&utm_campaign=iobit-driver-booster-pro-1-1-0-551-final-datecode-26-11-2013-portable http://www.brother-usa.com/Support/Default.aspx?PGID=2#.UrCdobTCemp

If Cominication error may be you are using moden in same telephone line so better way to use spliter

Try this be patient and read all of it http://office.manualsonline.com/manuals/mfg/brother/fax_930.html

Setting Ring Volume...
You can adjust the ring volume when our fax machine is idle. You can set a ring volume or press until the ring is off.

Press to adjust the volume level. Each press of the key will sound the ringer so you will know the volume of the ringer you are selecting. When done, simply stop pushing the buttons and it will be set until you choose to adjust it again.

you cannot

I am going to assume you are using the Auto Document Feeder for when you are copying and faxing.When you lift the scanner top (As if you are placing a single document on the scanner glass) there is a small strip of glass to the left (normally) of the main scanner glass. This is the ADF scanner location. You will find that there will be two marks on this glass at the points you get lines on copied and faxed documents. Normally this is ballpoint ink that was not completely dried when fed through the ADF or Twink (Whiteout) that was not completely dry when fed through the ADF. Using rubbing alcohol or other cleaning products of similar gender clean this mess off the glass. If it does not come off it could be actual scratches on the glass which can only be fixed by replacing the glass.

The Brother Linux scanner driver works only with a superuser by default. To use it with a normal user, you will have to make some settings. Setting for normal users http://welcome.solutions.brother.com...1c.html#u13.04 There is also an installer glitch when installing on 64 bit systems. I don't know if it's been fixed or not. Here is the Brother info You'll need to scroll down a bit to find the appropriate brscan version. I think the 430 uses brscan4 but I'm not certain. Install the scan driver. Copy the following files under /usr/lib64/ to /usr/lib/ For brscan4 Users: /usr/lib64/sane/libsane-brother4.so.1.0.7 /usr/lib64/sane/libsane-brother4.so /usr/lib64/sane/libsane-brother4.so.14/ to /usr/lib/. http://welcome.solutions.brother.com...cn.html#f00106 You'll probably need to restart after applying these fixes. Still having Problem Then follow Us For Brother Printer Support

1. Turn off the P-touch.
2. While holding down the Shift key and the "R" keys, press the On/Off key once and then release the "Shift" and the "R" keys.
3. "English" should be on the display and then press . If "English" did not display, repeat steps 1 thru 2.
4. "inch" will be on the display, press the "Enter" key.
5. Set the Date (MM/DD/YY) and Time (hh:mm)

Still having Problem Then follow Us For Brother Printer Support