Building Materials - Page 7 - Recent Questions, Troubleshooting & Support
Rotting outside door and frame
Good quality timber, properly treated and painted with knotting where needed,1 coat of primer, 1 coat of undercoat and two coats of topcoat. On a hardwood stained door, at least 6 coats, with a new coat added every 2 years.
Also fix any issues with water that is dripping or remaining near the wood.
1/30/2022 1:52:44 PM •
Building...
•
Answered
on Jan 30, 2022
My genie garage dooropener is blinking red on the opener motor. It is suppose to be blue.
1. If both round and long LED's are blinking, unplug the opener motor for five seconds, and replug. If the lights go back to normal, it was just a program error. If they both continue to blink, it's probably not user-serviceable.
2. If the round LED is blinking and the long LED is off, it is usually the door sensors that are obstructed or knocked out of line.
3. If the Long LED is blinking and the round LED is off, it is usually a bad roller or hinge that won't let the door move freely, something stuck in a track or a bent track.
1/6/2022 3:34:16 PM •
Building...
•
Answered
on Jan 06, 2022
How much laminated floor should I get?
You get an idea on how much laminated floor you will need by
measuring the length and the width of the rooms that you plan on installing
laminated floor, multiply the length by the width and add 10 percent for
installing errors and variation in floor design.
1/6/2022 6:42:54 AM •
Building...
•
Answered
on Jan 06, 2022
How do you adjust the tension for self closing doors
Questions moved from Cars and Trucks Category to Doors.
It depends on the type:
Hydraulic that fix at the top of the door? There are two screws, they are normally on the end. There are two, one says 'CLOSE' and the other says 'LATCH'. Close is the first one that comes into play when you let go of the door and then Latch take over and shuts the door to lock with just the right amount of force. The screws only need SMALL movements.
Or
Peeko - Type door closers. These are fixed in the centre of the hinge door edge and frame edge and join the door to the frame with a chain that looks like a bicycle chain. For those, you open the door, slip a small nail in the chain near the frame. Undo the fitting in the door. Turning the chain and fitting tightens or loosens the spring on the door frame.
..
11/27/2021 1:03:17 AM •
Building...
•
Answered
on Nov 27, 2021
Model 3016. Can't find the learn button to reprogram the remote
The problems of not including FULL
make model (what it is)
Model 3016 - Hypoid Series 33A7 DC Right Angle Hollow ...
https://www.bodine-electric.com > products > 3016
CAD drawings, images, wiring diagrams, distributors for Model 3016 Hypoid Series 33A7 DC Right Angle Hollow Shaft SCR Rated 90V & 180V Gearmotors.
Product Type: 33A7-25H2
Speed (rpm): 83
Ray-Ban Model 3016 ' Old South Optometry - Vision Store
https://vision.store > Home > Glasses > Sunglasses
Ray-Ban Model 3016. $240.00. Ray-Ban Sunglasses. Frame & Lens Colour Combination. 1157, 125571, W0365, 990/7O, 1278T6, 114530, 114519, 114517. Quantity.
Qual-Craft Aluminum Pump Jack Scaffolding System Starter Kit
https://www.amazon.ca > Qual-Craft-Aluminum-Scaffol...
Qual-Craft Aluminum Pump Jack Scaffolding System Starter Kit - 36Ft., Model# 3016 : Amazon.ca: Everything Else.
Gala Spin Dryer, Model 3016, 7.5 Hp ' Plastic Machinery
https://www.arlingtonmachinery.com > product-detail
Used Gala Spin Dryer, Model 3016, 7.5 Hp plastic machinery and equipment from Arlington Plastics Machinery. We buy and Sell used and surplus equipment from ...
11/1/2021 11:07:34 PM •
Building...
•
Answered
on Nov 01, 2021
Not finding what you are looking for?