Home Security - Recent Questions, Troubleshooting & Support

Detecotrs have a limited lifespan of 5-7 years. So sounds like you need new one (It's not worth to buy just a sensor). Take a look on amazon: Amazon com Carbon monoxide detector (watch out on reviews). I hope this was helpful. cheers

Kidde Nighthawk... | Answered on Jan 22, 2020

Have you checked the new and improved du wifi plans? they are really amazing.

Home Security | Answered on Jan 22, 2020

You need to do a Factory Reset on it. Look in the manual. Look for a tiny hidden button on the back. Contact the manufacturer.


The Home... | Answered on Jan 20, 2020

Too close to each other interferences move it a aparts couple hundred from each other.Should work,with no problems.

Chamberlain ... | Answered on Jan 20, 2020

Connect the new wire to the wire going to the original door bell button. one core of the new wire to one core of the existing wire and connect the other new wire core to the other existing wire core. insulate the joints from each other and any metal surfaces.

The Home... | Answered on Jan 20, 2020

it is possible that the doorbell button is sticking down and keeping contact - so the doorbell keeps chiming.

New Home... | Answered on Jan 20, 2020

replace the button switch

Bell Sports... | Answered on Jan 20, 2020

You have to change the frequency so they won't do that.

Home Security | Answered on Jan 20, 2020

Batteries are located in the doorbell push button case in the back. Slide open a compartment to reveal the batteries.

Desa... | Answered on Jan 20, 2020

Possibly something inside the wall is interfering with signal reception.

Home Security | Answered on Jan 20, 2020

It seems your doorbell transmitter got wet and corroded the contacts.
These push buttons are not sealed at all and thus will let rain, snow etc. eventually corrode the electronics.
Solution: Find a new push button on eBay.


Desa... | Answered on Jan 20, 2020

need more info. Doorbells do not need 2 xfrms. The red off 24 volt xfmr foes to door switch and returns on white. If you have 2 door switch one switch to front door label on doorbell and the 2nd goes to back door label. What is the brand and model number/ I'll try and walk you thru it.

Heath Zenith... | Answered on Jan 20, 2020

Contact Zozi Support direct

ZOSI Security Camera System - ZOSI - Security Made Easy.

Zosi Security Camera System is widely regarded as a reliable supplier worldwide and has stood in the security camera system industry for over 13 years and. ‎Zosi Support Center · ‎Security System · ‎Contact Us · ‎ZOSI Smart App

Home Security | Answered on Jan 19, 2020

You need to put the combination back in to turn the handle to put it back into the open position.

Home Security | Answered on Jan 18, 2020

Not finding what you are looking for?
Home Security Logo

18,550 questions posted

Ask a Question

Usually answered in minutes!

Top Home Security Experts

Brad Brown

Level 3 Expert

18157 Answers


Level 3 Expert

85223 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides