Locks & Locksmithing - Recent Questions, Troubleshooting & Support

there should be an access code maybe on the back of the device, if you have mounted it, remove it and inspect the back of it for code also check for code anywhere inside the the advertisement from package. if you bought it from a neighbor and it was opened, give it back,,,nice try

Locks &... | Answered on Dec 05, 2019

Google (micromark)(MM40042)(manual) without prens OR contact Micromark diectly to request.

Locks &... | Answered on Nov 27, 2019

Thats a job for a locksmith locally.

Locks &... | Answered on Nov 27, 2019


Locks &... | Answered on Nov 25, 2019

Gunsafes are meant to be difficult to open. I'm unsure as to your logic in the novel use of that 9v battery, all it would have done was to short circuit the battery.

Remington's own website gives you only one option if you're a US resident, "Contact Liberty Safes, the licensee, at 800-247-5625 for assistance with obtaining the combination to your safe.

If your safe is a low cost model and you need access quickly then you'll have to cut the safe open, but more expensive models are resistant to this form of attack and the safe will need to be scrapped and replaced afterwards.

Locks &... | Answered on Nov 25, 2019

Contact Schlage or a locksmith, assuming you don't have a key.

Some models allow someone to replace a battery and reset it, but not known if yours is one.

See Contact information.


If you have any questions or need additional information, please contact us via phone at 888-805-9837 for the United States.
Hours of operation:
Monday - Friday 7:30 am to 5:30 pm (Central Time)
Saturday 9:00 am to 3:00 pm (Central Time)
If you have any questions or need additional information, please contact us via phone at 800-900-4734 for Canada.

Hours of operation:
Monday - Friday 8:00 am to 5.30 pm (Eastern Time)

Schlage Locks &... | Answered on Nov 23, 2019

Avinash: how to open safewell model eg50 dx locker ,Because I do not have any key to it. My contact no is 8800692700 and mai address avinash.chauhan86@gmail.com plz help me

Simplex Kaba... | Answered on Nov 12, 2019

If this is a battery operated lock then the backlight doesn't stay on (otherwise it will wear the batteries out). To make the keys light up when you want to enter your code you have to push the lock button on the keypad first. If the keypad light has never come on then open the door and manually lock the interior lock then press the keypad lock button then the above instructions will work. This is the solution I got from Kwikset customer support and it worked for me. Hope this helps you.

Kwikset 909 ... | Answered on Nov 06, 2019

Set the thumbturn to “unlocked” (vertical) position before u remove the inside cover to change the battery. Keep it in “unlocked” until you have completed the battery change and put the inside cover back on. Now u can put thumbturn in “locked” position and test your code. This is how I solved the same problem for me. Hope it works for you.

Locks &... | Answered on Nov 06, 2019

Request a replacement manual from Facto.

Locks &... | Answered on Oct 28, 2019

Not finding what you are looking for?
Locks & Locksmithing Logo

4,859 questions posted

Ask a Question

Usually answered in minutes!

Top Locks & Locksmithing Experts

john h

Level 3 Expert

22486 Answers

ray gallant
ray gallant

Level 3 Expert

65422 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29768 Answers

Are you a Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides