Locks & Locksmithing - Page 7 - Recent Questions, Troubleshooting & Support
The lock is beeping. I
Here is a link to the installation and programming instructions for your lock:
http://s7d5.scene7.com/is/content/BDHHI/kwikset-smartcode
Starting with Step 7 (battery replacement), it is very important that you follow the procedure very carefully throughout the rest of the steps.
If your problem persists, there is contact information at the bottom at the instructions sheet to enable you to pursue parts and further technical advice directly from Kwikset.
Good luck!
Have a SURESAFE brand safe at work which have no instructions
Hi there all I have a SURESAFE electronic security safe MODEL-OWSAFE30ES (1) To set your own code first on safe(2) locate the red reset button on the hinge end of the door.(3) Press the red button, which will illuminate the yellow light on the keypad.(4) Now key in your new code (3 to 8 digits) and press A or B to end. Note you have 30 second to complete this step.(5) Test your new code whilst the door is open. Safe will beep twice to confirm code has been entered correctly, and knob can be turned clockwise.(6) Repeat process any time you wish to change your code.,Hope this help regards rick
8/1/2021 7:42:22 AM •
Safe...
•
Answered
on Aug 01, 2021
I have a digital electronic safe home
1) look again for the key
2) call a lock smith
3) drill the lock
these safes arent expensive , cheaper to drill the lock and replace that a lock smith , but get a quote
7/29/2021 12:48:43 AM •
Safe...
•
Answered
on Jul 29, 2021
Need to reverse bolt
Called "handing" the lock (left-hand or right hand door hinges):Remove the battery pack. Keep the door open.Hold down the "Lock" button on the exterior keypad and at the same time, insert the battery pack into the interior assembly. Keep holding down the lock button until you hear two beeps, which will take approximately 30 seconds. During that time, the Smartcode mechanism will automatically drive in and out several times to determine proper handing.Done!There is an excellent installation & programming video where you can watch how to do this, and it also explains the features of the internal slide switches.http://www.kwikset.com/Videos/Vitro/smartcode.aspxGood luck!
Garage door repair
Garage door repair professionals may recommend cable replacement. Often the problems with the door starts with a broken cable and hence identifying it quickly keeps the repair costs to a minimum as you pay only for the labor charges. The faster you identify problems with the door, the lower are the associated costs.
Rona collection door lock
I Bought a Rona keyless door lock about 10 years a go.It is broke its life time warranty. where can I get it replace.
6/28/2021 3:40:58 PM •
Deadbolt...
•
Answered
on Jun 28, 2021
We have a Gordon Digital
Put the safe on your lap and bounce it on your knees and keep tying to turn the knob I had it opened in less then 10 seconds! And the batteries were dead this really does work.
4/2/2021 3:41:16 AM •
Safe...
•
Answered
on Apr 02, 2021
Unable to open my safe Sandelford Electronic N15115
I have a N 15115 safe I can not fine the key nor can I recall the number to open it. The safe I have the key sits behind the batteries and is hidden can you please let me know how I can open it regards Ian
3/29/2021 6:44:32 AM •
Locks &...
•
Answered
on Mar 29, 2021
Not finding what you are looking for?