Sewing Machines - Page 2 - Recent Questions, Troubleshooting & Support
The pressure foot on my bernina bernette 715 won't move
Troubleshoot this. Here are some steps you can take:
Safety Setting Adjustment:
In newer firmware versions (V9.xx), a safety sewing setting was added to prevent the ruler foot from hitting the needle holder when the foot is hovering and the needle is down.
If your presser foot only raises slightly (about 2mm), it might be due to this safety setting.
To resolve this, change the setting from the maximum of 2mm to a maximum of 6mm.
Remember to switch it back to the original setting when using the ruler foot.
Check the Needle Position:
Ensure that the needle is in the highest position (raised) before attempting to move the presser foot.
If the needle is down, the presser foot may not move freely.
Inspect for Obstructions:
Examine the area around the presser foot for any obstructions, tangled threads, or debris.
Make sure there's nothing preventing the presser foot from moving smoothly.
Presser Foot Pressure Adjustment:
Uneven fabric feed can occur if the pressure on the presser foot is too high or too low.
Adjust the presser foot pressure according to the thickness of the fabric you're working with.
Power Cycle and Reconnect:
Turn off the machine and disconnect it from the power source.
Reconnect it and power it back on.
Refer to the Manual:
Consult your Bernina Bernette 715 user manual for specific troubleshooting steps related to the presser foot. If these steps don't resolve the problem, you may have to take it to a professional repair service.
How do I replace the
Please try this
(click here). Honestly I don't have much idea, but I am only posting this link if it might of some help to you.
Good luck.
Thanks for using
FixYa.
Humvee HF-05 watch manual please?
Question edited for clarity, written backwards, add CAPS.
I can normally move Category and get it out of Sewing Machines where you put it, but the mechanism to do that is broken so it will have to stay there forever. We have a Watch category..
It is a single crown watch. The crown has two or possibly three stop positions, the first ones do Day and Date and the furthest out does the time.
https://www.google.com/search?q=Humvee+HF-05+watch+manual
..
Not finding what you are looking for?