Canon Cameras - Page 3 - Popular Questions, Answers, Tips & Manuals

Question edited for clarity. Question move from Computers to Canon Camera. There is no 'Reset' only Reset Camera to Defaults. The most likely reason is completely flat batteries. https://www.manualslib.com/manual/355860/Canon-Ixus-80-Is.html?page=177 ..

Question edited to add full make and model. Question moved from Dishwashers to Canon PowerShot A630. https://www.google.com/search?q=take+the+back+off+the+screen+of+A630+camera Personally, I would send it to Canon for professional service. It may just be a problem with insufficient battery milliamps. https://www.google.com/search?q=A630+camera+E24+Error+Code ..

Try another charging cord. The camera charging cords are just as bad as the phone cords. They just go bad quickly.

There must be either weakness in the contacts or the contacts are dirty. https://www.google.com/search?q=Canon+Powershot+a1100+will+only+switch+on+and+stay+on+if+I+press+the+battery+cover ..

you need to take it to the repair shop. the error is due to mechanism which is failing to bring the mirror back to desired location Regards Bilal

The card may be corrupted and unusable. Try with a new SD Card. If that doesn't work, you need Canon Service. Try formatting it in the computer, add images and see if you can see the images in the camera.

remove the film and have it repaired and serviced by Canon. It is worth getting it fixed if you like using film. A number of companies are now making digital backs for cameras.

Thank you for sharing superb information's. Your web-site is so cool cctv camera installation services best cctv installation in Hyderabad

Internal firmware is corrupted. Re-install from Canon site.I have attached a link for the manual: http://gdlp01.c-wss.com/gds/7/0900009927/01/PSSX100IS_CUG_EN.pdfHope that will help.

The part where the SD cards are inserted could be dirty and should be cleaned out with qutips and rubbing alcohol or it could also needs replaced as well.

Do a factory reset, then apply your user customization settings one by one until you find the one which causes this problem.

HOW TO BUILD FLASH ON../Kids Saying Yay [Sound Effect] - https://www.youtube.com/watch?v=xUMUE... From EpicSoundFX - https://www.youtube.com/channel/UChRh...

Try replacing batteries

9 years old model, probably not worth repair. You can get used one on ebay for little money

Feel free - we won't prevent you.

Highly unlikely. Google the service manual for the camera, see if that offers any help.

there may be dust inside the lens (motor ,gears and sensor) pleas open and use an air blower to oust it.

Same as any camera - uncover lens, point camera at subject, press shutter button. Simples.

The camera is trying to process information to or from the memory card. If the status does not change after a few minutes, you may have a damaged memory card. Turn the camera off. Remove the memory card and inspect it. Reinsert the memory card. Can you view photos on the LCD by pressing the arrow button? If so reconnect to your computer. If not, you most likely have a damaged memory card. Try inserting the memory card into a card reader connected directly to your computer. This may be able to still read the card when your camera cannot.

Corroded contacts caused by "moistening"