Canon PIXMA - Recent Questions, Troubleshooting & Support - Page 2
I am trying to print
trying to print multiple pages(3-4)in case you have not used for some time printer, photo paper quality to be good or another cause may be that ink cartridges are running low or is refiled
Bluetooth not found by computer
Hi Bryan,
if you installed the printer by USB, the computer will have installed the drivers for that connection. ( Although USB is Plug and Play ) I,d refer to your user manual regarding bluetooth connectivity, also your printer.
The bluetooth device ( printer ) usually has to transmit signals, to be detected by the Computer. You,ll probably find that if you enable bluetooth on the Laptop. And turn the bluetooth on the Printer ( if Applicable ) by turning on/off or other function ( sync et,c ) the laptop will sense the Printers signal.
Once you have a communication between the two your setup.
I,d suggest unplugging the USB, as the laptops software/hardware, will assume that the printer already has an adequate connection, and will look no further.
Hoipe this resolves your questions regarding Bluetooth Connectivity.
Mike @ compurepair.
My printer keeps saying it's
Canon is a Japanese brand that has spread its wings all over the world now. It is recognized for the manufacturing of cameras, camcorders, steppers, photocopiers, & medical equipment.
Similar to any hardware, even a printer has faults and problems while interacting with a different system. One of these issues is that it shows "Canon Printer Offline" even when it is properly connected.
Solution's of Canon Printer Offline:-
Solution 1: Restart the Printer Spooler service.
Solution 2: Disable Use Printer Offline feature of your Canon printer.
Solution 3: Reinstall your Canon printer software.
If, you are getting a Canon Printer Offline error to feel free Chat with Technician. If you are using a canon printer, it is possible that your printer cannot print correctly and then you find that its status is offline.
Contact Expert -
Canon Printer Offline
How do I deal with
Solution 1:
- Remove and replace the cartridges.
Solution 2:
Solution 3:
-
Reseat the print head to correct print issues or clear an error.
Solution 4:
- The print head is broken and it must be changed by a new one.
Source:
http://fix-your-printer.blogspot.com/2010/11/error-u052-on-canon-printers.html
Canon Pixma MX870 won’t turn on
my suggestion : take your printer to an authorized service center, probably the printer has a defective electronic board, there is nothing you can do to fix it
ERROR CODE 6C00
The printer has a Reset mode- somewhere.
But different makers/models have different settings.
Try the manual and if not mentioned there try the Canon website.
Failing that try this- with the printer switched off press a combination of 2 buttons[any 2] with them pressed switch the printer on
did it reset?- then try another combination.
take a look also at www.fixyourownprinter.com
also here http://www.fixya.com/support/p360551-canon_pixma_mp780_all_in_one_inkjet
Canon printer ip 3000 keeps sending error 6c00?
Try the following steps:
1. Turn off printer.
2. retaining button Resume/Cancel press button POWER - indicator it will catch fire by green color.
3. let go button Resume/Cancel, continuing to retain POWER.
4. press button Resume/Cancel of 2 times, retaining POWER, after which let go all buttons.
5. when indicator will be lit BY GREEN - press button Resume/Cancel of 4 times!!!
6. turn off printer by button POWER.
6C00 error code
I think the 6A00 is a mechanism jam code.
There is a device that slides back n forth and acts like a window cleaners squeegie on the printhead. This mechanism seemed to be stuck at its full extention rather than being back at home base. It gets blocked up with drying ink and that had acted like a glue holding it. This has to be released in order to move the print head. If you are a technical head then attempt it otherwise take it to a Canon technician.
Colours are not true, grey is brown
You are getting leakage from one color cartridge to another. Do deep cleaning and run nozzle check. You may have been using non-Cannon inks. They can corrode the ink cartridge seats due to inferrior quality ink. You may need to replace the print head. Check out Cannon web site under this printer support. Print head is in the $50 neighborhood.
What does 5100 code mean?
community.usa.
canon.com/t5/Personal.../What...
code-
5100.../103212
Jul 7, 2014 - Please remove foreign objects so that the print head holder can move: ... closet and hooked it up this morning, I was getting the 5100 message.
https://support.usa.
canon.com/kb/index?page=content&id...
There are several reasons for error 5100 to appear. ... If the above recommendations donot help you resolve the error, the printer will need to be repaired.
? 2:23
https://www.youtube.com/watch?v=rJQVwwRxPv4
Mar 14, 2013 - Uploaded by ITJungles
Learn how to fix the Canon printer error 5100, and have your printer running again. ... Reset error Canon ...
Canon ip6700d error number 1415
I think I have come up with a solution!
When the error happens:
Open the cover and re-seat the cartridge.
Tilt the whole printer forward about 30 degrees or more
Close the cover.
This
has worked for me multiple times now. I think there is a small sensor
behind the contact chip that detects ink levels and when my printer is
flat the level of ink is lower than the sensor, when I tilt the printer
the error vanishes because the ink covers the sensor. Though I am not
sure why the software in the printer determines that there are
duplicate cartridges instead of just a low ink warning.
If you
still can't get it try taking a standard pencil eraser and gently rub
it over the contacts to clean off any oxidation, also do this to the
prongs that contact the chip that are inside the cartridge carrier,
They bend easily so do it very lightly.
Error e14 canon mp250
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
google_protectAndRun("render_ads.js::google_render_ad", google_handleError, google_render_ad);
Not finding what you are looking for?