Cardiozone Exercise & Fitness - Recent Questions, Troubleshooting & Support


Use a non alcohol based silicon spray or liquid. The WD40 brand make the 3 in 1 silicone spray and it’s good for all non waxed running belts. Just make sure you get the spray in the middle of the belt. (Underneath of course) watch a YouTube video if unsure.

Cardiozone... | Answered on Jan 03, 2019


Nice blog. Thanks for sharing this valuable information.
<a href="https://sportsindeed.com/excercise-fitness/treadmills.html">Treadmill Dealer in Chandigarh</a>
<a href="https://sportsindeed.com/excercise-fitness/treadmills.html">Treadmill Dealer in Mohali</a>
<a href="https://sportsindeed.com/excercise-fitness/treadmills.html">Treadmill Dealer in Panchkula</a>
<a href="https://sportsindeed.com/excercise-fitness/treadmills.html">Buy Treadmill in Chandigarh</a>

Cardiozone... | Answered on Nov 27, 2018


1st take side rails off front hood .you have afront roller and a back roller. for the front take out the two or one bolts holding the the roller in placenow the back roller take out the bolts that hold the roller in place . now on the deck there is 3or 4 screwson each side holding the deck in place. slide w/ belt off put on new deck.install screws, rollers ,bolts.. now center w/belt and adjust tention on w/belt

Cardiozone... | Answered on Aug 05, 2015


Your problem might be that a magnet has fallen off. Here's an illustrated guide which should make fixing it easy: http://fixmytreadmill.blogspot.com/2010/10/how-to-fix-treadmill-e1-error.html

Good luck.

Cardiozone... | Answered on Apr 21, 2014


Your controller is shot. Replace your controller

Cardiozone... | Answered on Jan 04, 2014


This could be cused by the the display cover you touch to control the functions pressing on the touch switch array just under it. Carefully remove this. it is held on by adhesive and see if the symptom goes away. If it does, look for any dents on the cover. I have worked with these type of switches for nearly 20 years and they can be problematic. The other possibility is the mechanical switches you use to increase/decrease speed or tilt. They plug in seperately and you can disconnect them to see if they are causing the problem.

Cardiozone... | Answered on Dec 29, 2013


This usually means a faulty LCB or motor.The fact it has not been used much doesn't matter. It is 7 years old. Usually you can not see faulty parts on the LCB. I do think if you really want the answer call a treadmill repairer . If you don't know what you are doing it can be dangerous.

Cardiozone... | Answered on Dec 04, 2013


replace the old batteries and clean the contacts with c. cleaner
2) tight and clean the ribbon cables insides.
3) tight the upper and lower connection , and clean
4) Adjust the Reed SWITCH, see the diagram attached.
God bless youa69ffffa-58f3-4090-87b2-8735485741e2.gif

Cardiozone... | Answered on Oct 10, 2013

Not finding what you are looking for?
Cardiozone Logo

46 questions posted

Ask a Question

Usually answered in minutes!

Top Cardiozone Exercise & Fitness Experts

Brad Brown

Level 3 Expert

18121 Answers

Jesse Garza

Level 2 Expert

80 Answers

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Are you a Cardiozone Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...