Cardiozone Exercise & Fitness - Page 8 - Popular Questions, Answers, Tips & Manuals
Hobart profi fx90a dishwasher missing link to STE?
Hi,
your machine might need maintenance. You can reach out to a Hobart service agent to get this maintenance done. I didn't see any error code associated with "missing link", you might check your device manual for this before calling the agent. Thank you.
9/26/2022 7:57:44 AM •
Exercise &...
•
1,451 views • 0 helpful votes
When I turned on my pro form 540s treadmill using the magnetic key it turned on like normal,
The issue with your ProForm 540s treadmill is likely due to a problem with the speed control circuit. Here are a few steps you can try to resolve the issue:
- Check the speed sensor: The speed sensor on the treadmill can be damaged, causing the control board to shut down the machine. Check the wiring and connections to the sensor, and replace it if it's damaged.
- Check the wiring: If the wiring connecting the control board and motor is damaged, it can cause the control board to shut down the machine. Check the wiring and connections for any damage, and repair or replace as necessary.
- Check the control board: If the control board is damaged, it can cause the machine to shut down. You can try to reset the control board by unplugging the machine from the electrical outlet for a few minutes and then plugging it back in. If the issue persists, you may need to replace the control board.
If you're not comfortable with the above steps, it's best to contact a qualified repair technician for assistance.
1/30/2023 8:54:21 PM •
Exercise &...
•
45 views • 0 helpful votes
MY WEIDER XP 600 WILL NOT ADJUST THE WEIGHT WLM
If you are having trouble adjusting the weight on your Weider XP 600, try the following steps:
- Make sure the weight stack is empty.
- Locate the weight selector pin and remove it.
- Check the guide rods and make sure they are clean and free of debris.
- Add the desired weight plates to the stack.
- Reinsert the weight selector pin into the weight stack, making sure it is fully seated in the appropriate slot.
- Attempt to lift the weight stack slightly to ensure that the pin is holding the selected weight.
- Repeat the process if necessary, making sure to choose the appropriate weight.
If the above steps do not solve the issue, there may be an issue with the weight selector mechanism or other internal components of the machine. In this case, it is recommended to contact Weider customer service or a certified repair technician for further assistance.
1/14/2023 2:25:43 AM •
Exercise &...
•
66 views • 0 helpful votes
Pacemaster Pro Elite error code 35
Error code 35 on a Pacemaster Pro Elite treadmill typically indicates a problem with the treadmill's speed sensor. This sensor is responsible for detecting the speed at which the treadmill belt is moving and providing that information to the treadmill's control panel. If the speed sensor is not functioning properly, the treadmill may display error code 35 and stop operating.
There are a few things you can try to troubleshoot and fix this error:
- Check the connections between the speed sensor and the control panel. Make sure that the connectors are securely plugged in and that there are no visible signs of damage.
- Clean the speed sensor. The speed sensor may be dirty or covered in debris, which can affect its ability to accurately detect the treadmill's speed. Use a dry cloth to gently wipe away any dirt or debris.
- Check the treadmill belt for proper tension. If the belt is too loose, it may cause the speed sensor to malfunction. Adjust the belt tension according to the manufacturer's instructions.
- Replace the speed sensor. If none of the above steps fix the problem, the speed sensor may be faulty and need to be replaced. This is a more complex repair that may require the assistance of a professional.
I hope these suggestions help you resolve the error code 35 issue on your Pacemaster Pro Elite treadmill. If you are unable to fix the problem or if the error persists, it is recommended to contact the manufacturer for further assistance.
12/25/2022 3:52:05 AM •
Exercise &...
•
109 views • 0 helpful votes
1750 commercial Norditrack treadmill stuck on Whoops error occurred.
The "Whoops" error on a NordicTrack treadmill usually indicates a software or connectivity issue. Here are a few steps you can try to troubleshoot the problem:
- Unplug the treadmill from the power source and wait for a few minutes before plugging it back in.
- Make sure the treadmill is connected to a stable and reliable Wi-Fi network. If the issue started when you tried to connect to the Internet, this could be the problem.
- If the issue persists, try resetting the treadmill's software by following these steps: a. Hold down the Stop button and the Speed Up button while inserting the safety key. b. Hold the buttons until the treadmill beeps twice. c. Release the buttons and wait for the treadmill to reset.
- If none of these steps work, contact NordicTrack customer support for further assistance.
It's also possible that the previous owner may have sold you a defective treadmill, so you may want to consider reaching out to them for a refund or replacement.
11/25/2022 7:43:16 PM •
Exercise &...
•
198 views • 0 helpful votes
Lifecore R100 rowing machine display not working
If the display on your Lifecore R100 rowing machine is fully on but not responding to any selections, it may be a sign of a software or hardware issue. Here are a few troubleshooting steps you can try:
- Check the power source: Make sure the rowing machine is properly plugged into a working outlet. If it is, unplug it and plug it back in to see if that resets the display.
- Reset the machine: Try resetting the rowing machine to its factory settings. Look for a reset button on the console or in the user manual. Press and hold the button for a few seconds until the display turns off, then release the button and turn the machine back on.
- Check the connections: Make sure all cables and connections are secure and not damaged. If you find any damaged cables or connections, replace them.
- Contact customer support: If none of the above steps work, contact the manufacturer's customer support for further assistance. They may be able to walk you through additional troubleshooting steps or send a technician to repair the machine.
11/6/2022 3:54:41 AM •
Exercise &...
•
300 views • 0 helpful votes
Pacemaster Pro Elite Motor Controller 9501001 Rev J question
It is likely that the relay responsible for the incline down function is the one located at the lower right corner of the board. You may also want to check the power supply as well as the wiring of the solenoid coils connected to the board to ensure that they are working properly. Additionally, you should also check the motor controller board itself and make sure all of the connections are secure.
12/26/2022 3:08:08 AM •
Exercise &...
•
72 views • 0 helpful votes
I have an old Trotter 525x treadmill at my home that intermittently fails to operate properly. Anyone have any ideas on what might causing this?
There could be a few potential causes for your treadmill malfunctioning. Without more information or a proper diagnosis it is hard to know for certain, but here are some possibilities:
- Power supply issue: The continuous loud pitched tone and the lower red LED lights illuminating on the display board could indicate a problem with the power supply. This could be caused by a faulty power cord, a problem with the outlet, or an issue with the treadmill's internal power supply.
- Control board issue: The control board is responsible for controlling the functions of the treadmill, including the programs and diagnostic modes. A malfunctioning control board could cause the treadmill to stop working correctly or prevent you from entering into program or diagnostic modes.
- Motor controller issue: The motor controller is responsible for controlling the speed and torque of the treadmill's motor. A malfunctioning motor controller could cause the treadmill to suddenly stop running or have difficulty maintaining a steady pace.
- Sensor issue: Treadmills have sensors that detect the speed and distance of the belt. A malfunctioning sensor could cause the treadmill to stop working or give inaccurate readings.
- Wiring issue: There may be a problem with the wiring inside the treadmill that is causing the malfunction. This could be caused by a broken wire, a loose connection, or damage to the insulation.
It may be best to contact a qualified service technician to inspect and diagnose the issue with your treadmill. They will be able to troubleshoot the problem and make necessary repairs, or advise on replacement of certain parts if necessary. It may also be a good idea to check the warranty on your treadmill to see if it is still covered.
12/27/2022 9:17:00 PM •
Exercise &...
•
60 views • 0 helpful votes
Ford figo 2012, model 14790965
The Ford Figo 2010 2012 has 1 Diesel Engine and 1 Petrol Engine on offer. The Diesel engine is 1399 cc while the Petrol engine is 1196 cc . It is available with Manual transmission.Depending upon the variant and fuel type the Figo 2010 2012 has a mileage of 15.6 to 20.0 kmpl & Ground clearance of Figo 2010 2012 is 168mm. The Figo 2010 2012 is a 5 seater 4 cylinder car and has length of 3795mm, width of 1680mm and a wheelbase of 2489mm.
1/16/2023 6:28:30 PM •
Exercise &...
•
35 views • 0 helpful votes
Not finding what you are looking for?